View:
Rod T-seals were originally developed to replace o-rings, and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap. 2. Spiral or twisting failure due to instability in the groove. T-seal back-ups are hydraulically or pneumatically driven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealing line. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Temperature: -40° to +225°F. Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
7.44
Each
Rod T-seals were originally developed to replace o-rings, and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap. 2. Spiral or twisting failure due to instability in the groove. T-seal back-ups are hydraulically or pneumatically driven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealing line. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Temperature: -40° to +225°F. Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
7.94
Each
Rod T-seals were originally developed to replace o-rings, and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap. 2. Spiral or twisting failure due to instability in the groove. T-seal back-ups are hydraulically or pneumatically driven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealing line. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Temperature: -40° to +225°F. Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
8.38
Each
Rod T-seals were originally developed to replace o-rings, and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap. 2. Spiral or twisting failure due to instability in the groove. T-seal back-ups are hydraulically or pneumatically driven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealing line. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Temperature: -40° to +225°F. Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
5.30
Each
Rod T-seals were originally developed to replace o-rings, and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap. 2. Spiral or twisting failure due to instability in the groove. T-seal back-ups are hydraulically or pneumatically driven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealing line. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Temperature: -40° to +225°F. Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
8.79
Each
Rod T-seals were originally developed to replace o-rings, and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap. 2. Spiral or twisting failure due to instability in the groove. T-seal back-ups are hydraulically or pneumatically driven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealing line. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Temperature: -40° to +225°F. Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
8.93
Each
Rod T-seals were originally developed to replace o-rings, and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap. 2. Spiral or twisting failure due to instability in the groove. T-seal back-ups are hydraulically or pneumatically driven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealing line. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Temperature: -40° to +225°F. Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
9.22
Each
Rod T-seals were originally developed to replace o-rings, and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap. 2. Spiral or twisting failure due to instability in the groove. T-seal back-ups are hydraulically or pneumatically driven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealing line. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Temperature: -40° to +225°F. Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
6.58
Each
Rod T-seals were originally developed to replace o-rings, and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap. 2. Spiral or twisting failure due to instability in the groove. T-seal back-ups are hydraulically or pneumatically driven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealing line. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Temperature: -40° to +225°F. Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
6.61
Each
Rod T-seals were originally developed to replace o-rings, and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap. 2. Spiral or twisting failure due to instability in the groove. T-seal back-ups are hydraulically or pneumatically driven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealing line. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Temperature: -40° to +225°F. Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
6.96
Each
Rod T-seals were originally developed to replace o-rings, and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap. 2. Spiral or twisting failure due to instability in the groove. T-seal back-ups are hydraulically or pneumatically driven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealing line. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Temperature: -40° to +225°F. Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
10.06
Each
Rod T-seals were originally developed to replace o-rings, and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap. 2. Spiral or twisting failure due to instability in the groove. T-seal back-ups are hydraulically or pneumatically driven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealing line. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Temperature: -40° to +225°F. Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
7.90
Each
Rod T-seals were originally developed to replace o-rings, and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap. 2. Spiral or twisting failure due to instability in the groove. T-seal back-ups are hydraulically or pneumatically driven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealing line. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Temperature: -40° to +225°F. Pressure: 0 to 5,000 PSI
Available:
Out Of Stock
ETA:
03/15/2018
Your Price:
10.44
Each
Rod T-seals were originally developed to replace o-rings, and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap. 2. Spiral or twisting failure due to instability in the groove. T-seal back-ups are hydraulically or pneumatically driven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealing line. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Temperature: -40° to +225°F. Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
6.94
Each
Rod T-seals were originally developed to replace o-rings, and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap. 2. Spiral or twisting failure due to instability in the groove. T-seal back-ups are hydraulically or pneumatically driven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealing line. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Temperature: -40° to +225°F. Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
7.18
Each
Rod T-seals were originally developed to replace o-rings, and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap. 2. Spiral or twisting failure due to instability in the groove. T-seal back-ups are hydraulically or pneumatically driven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealing line. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Temperature: -40° to +225°F. Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
7.88
Each
Rod T-seals were originally developed to replace o-rings, and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap. 2. Spiral or twisting failure due to instability in the groove. T-seal back-ups are hydraulically or pneumatically driven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealing line. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Temperature: -40° to +225°F. Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
13.55
Each
Rod T-seals were originally developed to replace o-rings, and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap. 2. Spiral or twisting failure due to instability in the groove. T-seal back-ups are hydraulically or pneumatically driven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealing line. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Temperature: -40° to +225°F. Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
7.10
Each
Rod T-seals were originally developed to replace o-rings, and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap. 2. Spiral or twisting failure due to instability in the groove. T-seal back-ups are hydraulically or pneumatically driven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealing line. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Temperature: -40° to +225°F. Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
11.33
Each
Rod T-seals were originally developed to replace o-rings, and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap. 2. Spiral or twisting failure due to instability in the groove. T-seal back-ups are hydraulically or pneumatically driven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealing line. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Temperature: -40° to +225°F. Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
9.48
Each
Rod T-seals were originally developed to replace o-rings, and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap. 2. Spiral or twisting failure due to instability in the groove. T-seal back-ups are hydraulically or pneumatically driven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealing line. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Temperature: -40° to +225°F. Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
12.44
Each
Rod T-seals were originally developed to replace o-rings, and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap. 2. Spiral or twisting failure due to instability in the groove. T-seal back-ups are hydraulically or pneumatically driven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealing line. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Temperature: -40° to +225°F. Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
7.90
Each
Rod T-seals were originally developed to replace o-rings, and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap. 2. Spiral or twisting failure due to instability in the groove. T-seal back-ups are hydraulically or pneumatically driven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealing line. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Temperature: -40° to +225°F. Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
6.49
Each
Rod T-seals were originally developed to replace o-rings, and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap. 2. Spiral or twisting failure due to instability in the groove. T-seal back-ups are hydraulically or pneumatically driven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealing line. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Temperature: -40° to +225°F. Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
9.73
Each
Rod T-seals were originally developed to replace o-rings, and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap. 2. Spiral or twisting failure due to instability in the groove. T-seal back-ups are hydraulically or pneumatically driven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealing line. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Temperature: -40° to +225°F. Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
7.30
Each
Rod T-seals were originally developed to replace o-rings, and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap. 2. Spiral or twisting failure due to instability in the groove. T-seal back-ups are hydraulically or pneumatically driven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealing line. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Temperature: -40° to +225°F. Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
10.05
Each
Rod T-seals were originally developed to replace o-rings, and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap. 2. Spiral or twisting failure due to instability in the groove. T-seal back-ups are hydraulically or pneumatically driven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealing line. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Temperature: -40° to +225°F. Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
8.14
Each
Rod T-seals were originally developed to replace o-rings, and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap. 2. Spiral or twisting failure due to instability in the groove. T-seal back-ups are hydraulically or pneumatically driven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealing line. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Temperature: -40° to +225°F. Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
8.62
Each
Rod T-seals were originally developed to replace o-rings, and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap. 2. Spiral or twisting failure due to instability in the groove. T-seal back-ups are hydraulically or pneumatically driven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealing line. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Temperature: -40° to +225°F. Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
9.59
Each
Rod T-seals were originally developed to replace o-rings, and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap. 2. Spiral or twisting failure due to instability in the groove. T-seal back-ups are hydraulically or pneumatically driven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealing line. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Temperature: -40° to +225°F. Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
10.05
Each
Rod T-seals were originally developed to replace o-rings, and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap. 2. Spiral or twisting failure due to instability in the groove. T-seal back-ups are hydraulically or pneumatically driven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealing line. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Temperature: -40° to +225°F. Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
10.11
Each
Rod T-seals were originally developed to replace o-rings, and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap. 2. Spiral or twisting failure due to instability in the groove. T-seal back-ups are hydraulically or pneumatically driven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealing line. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Temperature: -40° to +225°F. Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
10.17
Each
Rod T-seals were originally developed to replace o-rings, and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap. 2. Spiral or twisting failure due to instability in the groove. T-seal back-ups are hydraulically or pneumatically driven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealing line. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Temperature: -40° to +225°F. Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
11.53
Each
Rod T-seals were originally developed to replace o-rings, and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap. 2. Spiral or twisting failure due to instability in the groove. T-seal back-ups are hydraulically or pneumatically driven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealing line. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Temperature: -40° to +225°F. Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
11.83
Each
Rod T-seals were originally developed to replace o-rings, and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap. 2. Spiral or twisting failure due to instability in the groove. T-seal back-ups are hydraulically or pneumatically driven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealing line. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Temperature: -40° to +225°F. Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
12.37
Each
Rod T-seals were originally developed to replace o-rings, and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap. 2. Spiral or twisting failure due to instability in the groove. T-seal back-ups are hydraulically or pneumatically driven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealing line. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Temperature: -40° to +225°F. Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
30.32
Each
View: