ATTENTION! PLEASE BE AWARE! DUE TO SEVERE WEATHER CONDITIONS IN OUR AREA WE WILL BE CLOSING OUR FACILITY AT 1PM TODAY (2/20/19) FED-EX WILL NOT BE PICKING UP ORDERS AT OUR DISTRIBUTION CENTER TODAY. YOU WILL STILL BE ABLE TO PLACE ORDERS ONLINE BUT ORDERS PLACED AFTER 1PM TODAY WILL NOT SHIP UNTIL TOMORROW (2/21/19).

PLEASE BE AWARE! DUE TO SEVERE WEATHER CONDITIONS IN OUR AREA WE WILL BE CLOSING OUR FACILITY AT 1PM TODAY (2/20/19) FED-EX WILL NOT BE PICKING UP ORDERS AT OUR DISTRIBUTION CENTER TODAY. YOU WILL STILL BE ABLE TO PLACE ORDERS ONLINE BUT ORDERS PLACED AFTER 1PM TODAY WILL NOT SHIP UNTIL TOMORROW (2/21/19).

PLEASE BE AWARE! DUE TO SEVERE WEATHER CONDITIONS IN OUR AREA WE WILL BE CLOSING OUR FACILITY AT 1PM TODAY (2/20/19) FED-EX WILL NOT BE PICKING UP ORDERS AT OUR DISTRIBUTION CENTER TODAY. YOU WILL STILL BE ABLE TO PLACE ORDERS ONLINE BUT ORDERS PLACED AFTER 1PM TODAY WILL NOT SHIP UNTIL TOMORROW (2/21/19).

PLEASE BE AWARE! DUE TO SEVERE WEATHER CONDITIONS IN OUR AREA WE WILL BE CLOSING OUR FACILITY AT 1PM TODAY (2/20/19) FED-EX WILL NOT BE PICKING UP ORDERS AT OUR DISTRIBUTION CENTER TODAY. YOU WILL STILL BE ABLE TO PLACE ORDERS ONLINE BUT ORDERS PLACED AFTER 1PM TODAY WILL NOT SHIP UNTIL TOMORROW (2/21/19).

PLEASE BE AWARE! DUE TO SEVERE WEATHER CONDITIONS IN OUR AREA WE WILL BE CLOSING OUR FACILITY AT 1PM TODAY (2/20/19) FED-EX WILL NOT BE PICKING UP ORDERS AT OUR DISTRIBUTION CENTER TODAY. YOU WILL STILL BE ABLE TO PLACE ORDERS ONLINE BUT ORDERS PLACED AFTER 1PM TODAY WILL NOT SHIP UNTIL TOMORROW (2/21/19).

PLEASE BE AWARE! DUE TO SEVERE WEATHER CONDITIONS IN OUR AREA WE WILL BE CLOSING OUR FACILITY AT 1PM TODAY (2/20/19) FED-EX WILL NOT BE PICKING UP ORDERS AT OUR DISTRIBUTION CENTER TODAY. YOU WILL STILL BE ABLE TO PLACE ORDERS ONLINE BUT ORDERS PLACED AFTER 1PM TODAY WILL NOT SHIP UNTIL TOMORROW (2/21/19).

PLEASE BE AWARE! DUE TO SEVERE WEATHER CONDITIONS IN OUR AREA WE WILL BE CLOSING OUR FACILITY AT 1PM TODAY (2/20/19) FED-EX WILL NOT BE PICKING UP ORDERS AT OUR DISTRIBUTION CENTER TODAY. YOU WILL STILL BE ABLE TO PLACE ORDERS ONLINE BUT ORDERS PLACED AFTER 1PM TODAY WILL NOT SHIP UNTIL TOMORROW (2/21/19).

PLEASE BE AWARE! DUE TO SEVERE WEATHER CONDITIONS IN OUR AREA WE WILL BE CLOSING OUR FACILITY AT 1PM TODAY (2/20/19) FED-EX WILL NOT BE PICKING UP ORDERS AT OUR DISTRIBUTION CENTER TODAY. YOU WILL STILL BE ABLE TO PLACE ORDERS ONLINE BUT ORDERS PLACED AFTER 1PM TODAY WILL NOT SHIP UNTIL TOMORROW (2/21/19).

PLEASE BE AWARE! DUE TO SEVERE WEATHER CONDITIONS IN OUR AREA WE WILL BE CLOSING OUR FACILITY AT 1PM TODAY (2/20/19) FED-EX WILL NOT BE PICKING UP ORDERS AT OUR DISTRIBUTION CENTER TODAY. YOU WILL STILL BE ABLE TO PLACE ORDERS ONLINE BUT ORDERS PLACED AFTER 1PM TODAY WILL NOT SHIP UNTIL TOMORROW (2/21/19).

PLEASE BE AWARE! DUE TO SEVERE WEATHER CONDITIONS IN OUR AREA WE WILL BE CLOSING OUR FACILITY AT 1PM TODAY (2/20/19) FED-EX WILL NOT BE PICKING UP ORDERS AT OUR DISTRIBUTION CENTER TODAY. YOU WILL STILL BE ABLE TO PLACE ORDERS ONLINE BUT ORDERS PLACED AFTER 1PM TODAY WILL NOT SHIP UNTIL TOMORROW (2/21/19).

PLEASE BE AWARE! DUE TO SEVERE WEATHER CONDITIONS IN OUR AREA WE WILL BE CLOSING OUR FACILITY AT 1PM TODAY (2/20/19) FED-EX WILL NOT BE PICKING UP ORDERS AT OUR DISTRIBUTION CENTER TODAY. YOU WILL STILL BE ABLE TO PLACE ORDERS ONLINE BUT ORDERS PLACED AFTER 1PM TODAY WILL NOT SHIP UNTIL TOMORROW (2/21/19).

PLEASE BE AWARE! DUE TO SEVERE WEATHER CONDITIONS IN OUR AREA WE WILL BE CLOSING OUR FACILITY AT 1PM TODAY (2/20/19) FED-EX WILL NOT BE PICKING UP ORDERS AT OUR DISTRIBUTION CENTER TODAY. YOU WILL STILL BE ABLE TO PLACE ORDERS ONLINE BUT ORDERS PLACED AFTER 1PM TODAY WILL NOT SHIP UNTIL TOMORROW (2/21/19).

PLEASE BE AWARE! DUE TO SEVERE WEATHER CONDITIONS IN OUR AREA WE WILL BE CLOSING OUR FACILITY AT 1PM TODAY (2/20/19) FED-EX WILL NOT BE PICKING UP ORDERS AT OUR DISTRIBUTION CENTER TODAY. YOU WILL STILL BE ABLE TO PLACE ORDERS ONLINE BUT ORDERS PLACED AFTER 1PM TODAY WILL NOT SHIP UNTIL TOMORROW (2/21/19).

PLEASE BE AWARE! DUE TO SEVERE WEATHER CONDITIONS IN OUR AREA WE WILL BE CLOSING OUR FACILITY AT 1PM TODAY (2/20/19) FED-EX WILL NOT BE PICKING UP ORDERS AT OUR DISTRIBUTION CENTER TODAY. YOU WILL STILL BE ABLE TO PLACE ORDERS ONLINE BUT ORDERS PLACED AFTER 1PM TODAY WILL NOT SHIP UNTIL TOMORROW (2/21/19).

PLEASE BE AWARE! DUE TO SEVERE WEATHER CONDITIONS IN OUR AREA WE WILL BE CLOSING OUR FACILITY AT 1PM TODAY (2/20/19) FED-EX WILL NOT BE PICKING UP ORDERS AT OUR DISTRIBUTION CENTER TODAY. YOU WILL STILL BE ABLE TO PLACE ORDERS ONLINE BUT ORDERS PLACED AFTER 1PM TODAY WILL NOT SHIP UNTIL TOMORROW (2/21/19).

PLEASE BE AWARE! DUE TO SEVERE WEATHER CONDITIONS IN OUR AREA WE WILL BE CLOSING OUR FACILITY AT 1PM TODAY (2/20/19) FED-EX WILL NOT BE PICKING UP ORDERS AT OUR DISTRIBUTION CENTER TODAY. YOU WILL STILL BE ABLE TO PLACE ORDERS ONLINE BUT ORDERS PLACED AFTER 1PM TODAY WILL NOT SHIP UNTIL TOMORROW (2/21/19).

PLEASE BE AWARE! DUE TO SEVERE WEATHER CONDITIONS IN OUR AREA WE WILL BE CLOSING OUR FACILITY AT 1PM TODAY (2/20/19) FED-EX WILL NOT BE PICKING UP ORDERS AT OUR DISTRIBUTION CENTER TODAY. YOU WILL STILL BE ABLE TO PLACE ORDERS ONLINE BUT ORDERS PLACED AFTER 1PM TODAY WILL NOT SHIP UNTIL TOMORROW (2/21/19).

PLEASE BE AWARE! DUE TO SEVERE WEATHER CONDITIONS IN OUR AREA WE WILL BE CLOSING OUR FACILITY AT 1PM TODAY (2/20/19) FED-EX WILL NOT BE PICKING UP ORDERS AT OUR DISTRIBUTION CENTER TODAY. YOU WILL STILL BE ABLE TO PLACE ORDERS ONLINE BUT ORDERS PLACED AFTER 1PM TODAY WILL NOT SHIP UNTIL TOMORROW (2/21/19).

PLEASE BE AWARE! DUE TO SEVERE WEATHER CONDITIONS IN OUR AREA WE WILL BE CLOSING OUR FACILITY AT 1PM TODAY (2/20/19) FED-EX WILL NOT BE PICKING UP ORDERS AT OUR DISTRIBUTION CENTER TODAY. YOU WILL STILL BE ABLE TO PLACE ORDERS ONLINE BUT ORDERS PLACED AFTER 1PM TODAY WILL NOT SHIP UNTIL TOMORROW (2/21/19).

PLEASE BE AWARE! DUE TO SEVERE WEATHER CONDITIONS IN OUR AREA WE WILL BE CLOSING OUR FACILITY AT 1PM TODAY (2/20/19) FED-EX WILL NOT BE PICKING UP ORDERS AT OUR DISTRIBUTION CENTER TODAY. YOU WILL STILL BE ABLE TO PLACE ORDERS ONLINE BUT ORDERS PLACED AFTER 1PM TODAY WILL NOT SHIP UNTIL TOMORROW (2/21/19).

PLEASE BE AWARE! DUE TO SEVERE WEATHER CONDITIONS IN OUR AREA WE WILL BE CLOSING OUR FACILITY AT 1PM TODAY (2/20/19) FED-EX WILL NOT BE PICKING UP ORDERS AT OUR DISTRIBUTION CENTER TODAY. YOU WILL STILL BE ABLE TO PLACE ORDERS ONLINE BUT ORDERS PLACED AFTER 1PM TODAY WILL NOT SHIP UNTIL TOMORROW (2/21/19).

PLEASE BE AWARE! DUE TO SEVERE WEATHER CONDITIONS IN OUR AREA WE WILL BE CLOSING OUR FACILITY AT 1PM TODAY (2/20/19) FED-EX WILL NOT BE PICKING UP ORDERS AT OUR DISTRIBUTION CENTER TODAY. YOU WILL STILL BE ABLE TO PLACE ORDERS ONLINE BUT ORDERS PLACED AFTER 1PM TODAY WILL NOT SHIP UNTIL TOMORROW (2/21/19).

PLEASE BE AWARE! DUE TO SEVERE WEATHER CONDITIONS IN OUR AREA WE WILL BE CLOSING OUR FACILITY AT 1PM TODAY (2/20/19) FED-EX WILL NOT BE PICKING UP ORDERS AT OUR DISTRIBUTION CENTER TODAY. YOU WILL STILL BE ABLE TO PLACE ORDERS ONLINE BUT ORDERS PLACED AFTER 1PM TODAY WILL NOT SHIP UNTIL TOMORROW (2/21/19).


Phone Customer Service Onsite Sales Address E-Mail
717.266.6617 Mon-Fri 7:30 am to 5:30 pm EST Mon-Fri 8:30 am to 5:00 pm EST 3995 N George St Ext, Manchester, PA 17345 Sales@AlleghenyYork.com
|◀ 1 - 12 of 210 ▶|
View:
Type B PolyPak® is a squeeze seal with a symmetrical profile for use rod applications. The rectangular shape of its cross section ensures stability in the gland. The standard Molythane® shell provides high wear resistance and the o-ring energizer functions as a spring to maintain sealing contact under low pressure or vacuum applications. The beveled lip design of the seal is excellent for cutting fluid film and is formed by a precision knife trimming process. A wide selection of sizes and alternate compounds allow this profile to match up with many hydraulic applications. The Type B PolyPak® is an economical choice as a stand-alone seal or can be used in tandem with a buffer seal. Dual Type B PolyPak® seals should not be installed back-to-back in bi-directional pressure applications, as a pressure trap between the seals may occur. Instead, for bi-directional piston sealing, incorporate a PIP Ring®
Available:
In Stock
Contact us to order
Type B PolyPak® is a squeeze seal with a symmetrical profile for use rod applications. The rectangular shape of its cross section ensures stability in the gland. The standard Molythane® shell provides high wear resistance and the o-ring energizer functions as a spring to maintain sealing contact under low pressure or vacuum applications. The beveled lip design of the seal is excellent for cutting fluid film and is formed by a precision knife trimming process. A wide selection of sizes and alternate compounds allow this profile to match up with many hydraulic applications. The Type B PolyPak® is an economical choice as a stand-alone seal or can be used in tandem with a buffer seal. Dual Type B PolyPak® seals should not be installed back-to-back in bi-directional pressure applications, as a pressure trap between the seals may occur. Instead, for bi-directional piston sealing, incorporate a PIP Ring®
Available:
In Stock
Contact us to order
Type B PolyPak® is a squeeze seal with a symmetrical profile for use rod applications. The rectangular shape of its cross section ensures stability in the gland. The standard Molythane® shell provides high wear resistance and the o-ring energizer functions as a spring to maintain sealing contact under low pressure or vacuum applications. The beveled lip design of the seal is excellent for cutting fluid film and is formed by a precision knife trimming process. A wide selection of sizes and alternate compounds allow this profile to match up with many hydraulic applications. The Type B PolyPak® is an economical choice as a stand-alone seal or can be used in tandem with a buffer seal. Dual Type B PolyPak® seals should not be installed back-to-back in bi-directional pressure applications, as a pressure trap between the seals may occur. Instead, for bi-directional piston sealing, incorporate a PIP Ring®
Available:
In Stock
Contact us to order
Type B PolyPak® is a squeeze seal with a symmetrical profile for use rod applications. The rectangular shape of its cross section ensures stability in the gland. The standard Molythane® shell provides high wear resistance and the o-ring energizer functions as a spring to maintain sealing contact under low pressure or vacuum applications. The beveled lip design of the seal is excellent for cutting fluid film and is formed by a precision knife trimming process. A wide selection of sizes and alternate compounds allow this profile to match up with many hydraulic applications. The Type B PolyPak® is an economical choice as a stand-alone seal or can be used in tandem with a buffer seal. Dual Type B PolyPak® seals should not be installed back-to-back in bi-directional pressure applications, as a pressure trap between the seals may occur. Instead, for bi-directional piston sealing, incorporate a PIP Ring®
Available:
In Stock
Contact us to order
Type B PolyPak® is a squeeze seal with a symmetrical profile for use rod applications. The rectangular shape of its cross section ensures stability in the gland. The standard Molythane® shell provides high wear resistance and the o-ring energizer functions as a spring to maintain sealing contact under low pressure or vacuum applications. The beveled lip design of the seal is excellent for cutting fluid film and is formed by a precision knife trimming process. A wide selection of sizes and alternate compounds allow this profile to match up with many hydraulic applications. The Type B PolyPak® is an economical choice as a stand-alone seal or can be used in tandem with a buffer seal. Dual Type B PolyPak® seals should not be installed back-to-back in bi-directional pressure applications, as a pressure trap between the seals may occur. Instead, for bi-directional piston sealing, incorporate a PIP Ring®
Available:
In Stock
Contact us to order
Type B PolyPak® is a squeeze seal with a symmetrical profile for use rod applications. The rectangular shape of its cross section ensures stability in the gland. The standard Molythane® shell provides high wear resistance and the o-ring energizer functions as a spring to maintain sealing contact under low pressure or vacuum applications. The beveled lip design of the seal is excellent for cutting fluid film and is formed by a precision knife trimming process. A wide selection of sizes and alternate compounds allow this profile to match up with many hydraulic applications. The Type B PolyPak® is an economical choice as a stand-alone seal or can be used in tandem with a buffer seal. Dual Type B PolyPak® seals should not be installed back-to-back in bi-directional pressure applications, as a pressure trap between the seals may occur. Instead, for bi-directional piston sealing, incorporate a PIP Ring®
Available:
In Stock
Contact us to order
Type B PolyPak® is a squeeze seal with a symmetrical profile for use rod applications. The rectangular shape of its cross section ensures stability in the gland. The standard Molythane® shell provides high wear resistance and the o-ring energizer functions as a spring to maintain sealing contact under low pressure or vacuum applications. The beveled lip design of the seal is excellent for cutting fluid film and is formed by a precision knife trimming process. A wide selection of sizes and alternate compounds allow this profile to match up with many hydraulic applications. The Type B PolyPak® is an economical choice as a stand-alone seal or can be used in tandem with a buffer seal. Dual Type B PolyPak® seals should not be installed back-to-back in bi-directional pressure applications, as a pressure trap between the seals may occur. Instead, for bi-directional piston sealing, incorporate a PIP Ring®
Available:
In Stock
Contact us to order
Type B PolyPak® is a squeeze seal with a symmetrical profile for use rod applications. The rectangular shape of its cross section ensures stability in the gland. The standard Molythane® shell provides high wear resistance and the o-ring energizer functions as a spring to maintain sealing contact under low pressure or vacuum applications. The beveled lip design of the seal is excellent for cutting fluid film and is formed by a precision knife trimming process. A wide selection of sizes and alternate compounds allow this profile to match up with many hydraulic applications. The Type B PolyPak® is an economical choice as a stand-alone seal or can be used in tandem with a buffer seal. Dual Type B PolyPak® seals should not be installed back-to-back in bi-directional pressure applications, as a pressure trap between the seals may occur. Instead, for bi-directional piston sealing, incorporate a PIP Ring®
Available:
In Stock
Contact us to order
Type B PolyPak® is a squeeze seal with a symmetrical profile for use rod applications. The rectangular shape of its cross section ensures stability in the gland. The standard Molythane® shell provides high wear resistance and the o-ring energizer functions as a spring to maintain sealing contact under low pressure or vacuum applications. The beveled lip design of the seal is excellent for cutting fluid film and is formed by a precision knife trimming process. A wide selection of sizes and alternate compounds allow this profile to match up with many hydraulic applications. The Type B PolyPak® is an economical choice as a stand-alone seal or can be used in tandem with a buffer seal. Dual Type B PolyPak® seals should not be installed back-to-back in bi-directional pressure applications, as a pressure trap between the seals may occur. Instead, for bi-directional piston sealing, incorporate a PIP Ring®
Available:
In Stock
Contact us to order
Type B PolyPak® is a squeeze seal with a symmetrical profile for use rod applications. The rectangular shape of its cross section ensures stability in the gland. The standard Molythane® shell provides high wear resistance and the o-ring energizer functions as a spring to maintain sealing contact under low pressure or vacuum applications. The beveled lip design of the seal is excellent for cutting fluid film and is formed by a precision knife trimming process. A wide selection of sizes and alternate compounds allow this profile to match up with many hydraulic applications. The Type B PolyPak® is an economical choice as a stand-alone seal or can be used in tandem with a buffer seal. Dual Type B PolyPak® seals should not be installed back-to-back in bi-directional pressure applications, as a pressure trap between the seals may occur. Instead, for bi-directional piston sealing, incorporate a PIP Ring®
Available:
In Stock
Contact us to order
Type B PolyPak® is a squeeze seal with a symmetrical profile for use rod applications. The rectangular shape of its cross section ensures stability in the gland. The standard Molythane® shell provides high wear resistance and the o-ring energizer functions as a spring to maintain sealing contact under low pressure or vacuum applications. The beveled lip design of the seal is excellent for cutting fluid film and is formed by a precision knife trimming process. A wide selection of sizes and alternate compounds allow this profile to match up with many hydraulic applications. The Type B PolyPak® is an economical choice as a stand-alone seal or can be used in tandem with a buffer seal. Dual Type B PolyPak® seals should not be installed back-to-back in bi-directional pressure applications, as a pressure trap between the seals may occur. Instead, for bi-directional piston sealing, incorporate a PIP Ring®
Available:
In Stock
Contact us to order
Type B PolyPak® is a squeeze seal with a symmetrical profile for use rod applications. The rectangular shape of its cross section ensures stability in the gland. The standard Molythane® shell provides high wear resistance and the o-ring energizer functions as a spring to maintain sealing contact under low pressure or vacuum applications. The beveled lip design of the seal is excellent for cutting fluid film and is formed by a precision knife trimming process. A wide selection of sizes and alternate compounds allow this profile to match up with many hydraulic applications. The Type B PolyPak® is an economical choice as a stand-alone seal or can be used in tandem with a buffer seal. Dual Type B PolyPak® seals should not be installed back-to-back in bi-directional pressure applications, as a pressure trap between the seals may occur. Instead, for bi-directional piston sealing, incorporate a PIP Ring®
Available:
In Stock
Contact us to order
|◀ 1 - 12 of 210 ▶|
View:

Allegheny York Hydraulic Seals