Over 30,000 Line Items in stock.

300 Seal Profiles.

98% Fill Rate.

Over 30,000 Line Items in stock.

300 Seal Profiles.

98% Fill Rate.

Over 30,000 Line Items in stock.

300 Seal Profiles.

98% Fill Rate.

Over 30,000 Line Items in stock.

300 Seal Profiles.

98% Fill Rate.

Over 30,000 Line Items in stock.

300 Seal Profiles.

98% Fill Rate.

Over 30,000 Line Items in stock.

300 Seal Profiles.

98% Fill Rate.

Over 30,000 Line Items in stock.

300 Seal Profiles.

98% Fill Rate.

Over 30,000 Line Items in stock.

300 Seal Profiles.

98% Fill Rate.

Over 30,000 Line Items in stock.

300 Seal Profiles.

98% Fill Rate.


|◀ 1 - 36 of 257 ▶|
View:
Item#:
4615100003000

3 x 5 x 1" Parker® Molythane Standard Loaded Lip Seal PolyPak®

A square shaped symmetrical squeeze seal with a knife trimmed scraper lip
Parkers® Standard PolyPak® is a squeeze seal with a symmetrical profile for use in either rod or piston applications. The standard Molythane® shell provides high wear resistance and the o-ring energizer functions as a spring to maintain sealing contact under low pressure. The Standard PolyPak® utilizes a straight cut scraper lip design formed by a precision trimming process. The scraper edge wipes both fluid film and contamination away from the seal. A wide selection of sizes and alternate compounds allow this profile to match up with many hydraulic applications. The Standard PolyPak® is an economical choice as a stand alone rod or piston seal. With less squeeze force than the Deep or Type B profiles, the Standard PolyPak® can be installed back-to back, in separate glands, for bi-directional sealing. To protect against pressure trapping, it is recommended that the o-ring be removed from the Standard PolyPak® facing the lower pressure side of the application.
Available:
In Stock
Contact us to order
Item#:
4615100004000

4 x 6 x 1" Parker® Molythane Standard Loaded Lip Seal PolyPak®

A square shaped symmetrical squeeze seal with a knife trimmed scraper lip
Parkers® Standard PolyPak® is a squeeze seal with a symmetrical profile for use in either rod or piston applications. The standard Molythane® shell provides high wear resistance and the o-ring energizer functions as a spring to maintain sealing contact under low pressure. The Standard PolyPak® utilizes a straight cut scraper lip design formed by a precision trimming process. The scraper edge wipes both fluid film and contamination away from the seal. A wide selection of sizes and alternate compounds allow this profile to match up with many hydraulic applications. The Standard PolyPak® is an economical choice as a stand alone rod or piston seal. With less squeeze force than the Deep or Type B profiles, the Standard PolyPak® can be installed back-to back, in separate glands, for bi-directional sealing. To protect against pressure trapping, it is recommended that the o-ring be removed from the Standard PolyPak® facing the lower pressure side of the application.
Available:
In Stock
Contact us to order
Item#:
4615100007000

7 x 9 x 1" Parker® Molythane Standard Loaded Lip Seal PolyPak®

A square shaped symmetrical squeeze seal with a knife trimmed scraper lip
Parkers® Standard PolyPak® is a squeeze seal with a symmetrical profile for use in either rod or piston applications. The standard Molythane® shell provides high wear resistance and the o-ring energizer functions as a spring to maintain sealing contact under low pressure. The Standard PolyPak® utilizes a straight cut scraper lip design formed by a precision trimming process. The scraper edge wipes both fluid film and contamination away from the seal. A wide selection of sizes and alternate compounds allow this profile to match up with many hydraulic applications. The Standard PolyPak® is an economical choice as a stand alone rod or piston seal. With less squeeze force than the Deep or Type B profiles, the Standard PolyPak® can be installed back-to back, in separate glands, for bi-directional sealing. To protect against pressure trapping, it is recommended that the o-ring be removed from the Standard PolyPak® facing the lower pressure side of the application.
Available:
In Stock
Contact us to order
Item#:
4615100007500

7.5 x 9.5 x 1" Parker® Molythane Standard Loaded Lip Seal PolyPak®

A square shaped symmetrical squeeze seal with a knife trimmed scraper lip
Parkers® Standard PolyPak® is a squeeze seal with a symmetrical profile for use in either rod or piston applications. The standard Molythane® shell provides high wear resistance and the o-ring energizer functions as a spring to maintain sealing contact under low pressure. The Standard PolyPak® utilizes a straight cut scraper lip design formed by a precision trimming process. The scraper edge wipes both fluid film and contamination away from the seal. A wide selection of sizes and alternate compounds allow this profile to match up with many hydraulic applications. The Standard PolyPak® is an economical choice as a stand alone rod or piston seal. With less squeeze force than the Deep or Type B profiles, the Standard PolyPak® can be installed back-to back, in separate glands, for bi-directional sealing. To protect against pressure trapping, it is recommended that the o-ring be removed from the Standard PolyPak® facing the lower pressure side of the application.
Available:
In Stock
Contact us to order
Item#:
4615100008000

8 x 10 x 1" Parker® Molythane Standard Loaded Lip Seal PolyPak®

A square shaped symmetrical squeeze seal with a knife trimmed scraper lip
Parkers® Standard PolyPak® is a squeeze seal with a symmetrical profile for use in either rod or piston applications. The standard Molythane® shell provides high wear resistance and the o-ring energizer functions as a spring to maintain sealing contact under low pressure. The Standard PolyPak® utilizes a straight cut scraper lip design formed by a precision trimming process. The scraper edge wipes both fluid film and contamination away from the seal. A wide selection of sizes and alternate compounds allow this profile to match up with many hydraulic applications. The Standard PolyPak® is an economical choice as a stand alone rod or piston seal. With less squeeze force than the Deep or Type B profiles, the Standard PolyPak® can be installed back-to back, in separate glands, for bi-directional sealing. To protect against pressure trapping, it is recommended that the o-ring be removed from the Standard PolyPak® facing the lower pressure side of the application.
Available:
In Stock
Contact us to order
Item#:
4615100014000

14 x 16 x 1" Parker® Molythane Standard Loaded Lip Seal PolyPak®

A square shaped symmetrical squeeze seal with a knife trimmed scraper lip
Parkers® Standard PolyPak® is a squeeze seal with a symmetrical profile for use in either rod or piston applications. The standard Molythane® shell provides high wear resistance and the o-ring energizer functions as a spring to maintain sealing contact under low pressure. The Standard PolyPak® utilizes a straight cut scraper lip design formed by a precision trimming process. The scraper edge wipes both fluid film and contamination away from the seal. A wide selection of sizes and alternate compounds allow this profile to match up with many hydraulic applications. The Standard PolyPak® is an economical choice as a stand alone rod or piston seal. With less squeeze force than the Deep or Type B profiles, the Standard PolyPak® can be installed back-to back, in separate glands, for bi-directional sealing. To protect against pressure trapping, it is recommended that the o-ring be removed from the Standard PolyPak® facing the lower pressure side of the application.
Available:
In Stock
Contact us to order
Item#:
4615100018000

18 x 20 x 1" Parker® Molythane Standard Loaded Lip Seal PolyPak®

A square shaped symmetrical squeeze seal with a knife trimmed scraper lip
Parkers® Standard PolyPak® is a squeeze seal with a symmetrical profile for use in either rod or piston applications. The standard Molythane® shell provides high wear resistance and the o-ring energizer functions as a spring to maintain sealing contact under low pressure. The Standard PolyPak® utilizes a straight cut scraper lip design formed by a precision trimming process. The scraper edge wipes both fluid film and contamination away from the seal. A wide selection of sizes and alternate compounds allow this profile to match up with many hydraulic applications. The Standard PolyPak® is an economical choice as a stand alone rod or piston seal. With less squeeze force than the Deep or Type B profiles, the Standard PolyPak® can be installed back-to back, in separate glands, for bi-directional sealing. To protect against pressure trapping, it is recommended that the o-ring be removed from the Standard PolyPak® facing the lower pressure side of the application.
Available:
Out Of Stock
Contact us to order
Item#:
461512500093

.093 x .343 x .125" Parker® Molythane Standard Loaded Lip Seal PolyPak®

A square shaped symmetrical squeeze seal with a knife trimmed scraper lip
Parkers® Standard PolyPak® is a squeeze seal with a symmetrical profile for use in either rod or piston applications. The standard Molythane® shell provides high wear resistance and the o-ring energizer functions as a spring to maintain sealing contact under low pressure. The Standard PolyPak® utilizes a straight cut scraper lip design formed by a precision trimming process. The scraper edge wipes both fluid film and contamination away from the seal. A wide selection of sizes and alternate compounds allow this profile to match up with many hydraulic applications. The Standard PolyPak® is an economical choice as a stand alone rod or piston seal. With less squeeze force than the Deep or Type B profiles, the Standard PolyPak® can be installed back-to back, in separate glands, for bi-directional sealing. To protect against pressure trapping, it is recommended that the o-ring be removed from the Standard PolyPak® facing the lower pressure side of the application.
Available:
In Stock
Contact us to order
Item#:
461512500140

.14 x .39 x .125" Parker® Molythane Standard Loaded Lip Seal PolyPak®

A square shaped symmetrical squeeze seal with a knife trimmed scraper lip
Parkers® Standard PolyPak® is a squeeze seal with a symmetrical profile for use in either rod or piston applications. The standard Molythane® shell provides high wear resistance and the o-ring energizer functions as a spring to maintain sealing contact under low pressure. The Standard PolyPak® utilizes a straight cut scraper lip design formed by a precision trimming process. The scraper edge wipes both fluid film and contamination away from the seal. A wide selection of sizes and alternate compounds allow this profile to match up with many hydraulic applications. The Standard PolyPak® is an economical choice as a stand alone rod or piston seal. With less squeeze force than the Deep or Type B profiles, the Standard PolyPak® can be installed back-to back, in separate glands, for bi-directional sealing. To protect against pressure trapping, it is recommended that the o-ring be removed from the Standard PolyPak® facing the lower pressure side of the application.
Available:
In Stock
Contact us to order
Item#:
461512500187

.187 x .437 x .125" Parker® Molythane Standard Loaded Lip Seal PolyPak®

A square shaped symmetrical squeeze seal with a knife trimmed scraper lip
Parkers® Standard PolyPak® is a squeeze seal with a symmetrical profile for use in either rod or piston applications. The standard Molythane® shell provides high wear resistance and the o-ring energizer functions as a spring to maintain sealing contact under low pressure. The Standard PolyPak® utilizes a straight cut scraper lip design formed by a precision trimming process. The scraper edge wipes both fluid film and contamination away from the seal. A wide selection of sizes and alternate compounds allow this profile to match up with many hydraulic applications. The Standard PolyPak® is an economical choice as a stand alone rod or piston seal. With less squeeze force than the Deep or Type B profiles, the Standard PolyPak® can be installed back-to back, in separate glands, for bi-directional sealing. To protect against pressure trapping, it is recommended that the o-ring be removed from the Standard PolyPak® facing the lower pressure side of the application.
Available:
In Stock
Contact us to order
Item#:
461512500359

.359 x .609 x .125" Parker® Molythane Standard Loaded Lip Seal PolyPak®

A square shaped symmetrical squeeze seal with a knife trimmed scraper lip
Parkers® Standard PolyPak® is a squeeze seal with a symmetrical profile for use in either rod or piston applications. The standard Molythane® shell provides high wear resistance and the o-ring energizer functions as a spring to maintain sealing contact under low pressure. The Standard PolyPak® utilizes a straight cut scraper lip design formed by a precision trimming process. The scraper edge wipes both fluid film and contamination away from the seal. A wide selection of sizes and alternate compounds allow this profile to match up with many hydraulic applications. The Standard PolyPak® is an economical choice as a stand alone rod or piston seal. With less squeeze force than the Deep or Type B profiles, the Standard PolyPak® can be installed back-to back, in separate glands, for bi-directional sealing. To protect against pressure trapping, it is recommended that the o-ring be removed from the Standard PolyPak® facing the lower pressure side of the application.
Available:
In Stock
Contact us to order
Item#:
461512500437

.437 x .687 x .125" Parker® Molythane Standard Loaded Lip Seal PolyPak®

A square shaped symmetrical squeeze seal with a knife trimmed scraper lip
Parkers® Standard PolyPak® is a squeeze seal with a symmetrical profile for use in either rod or piston applications. The standard Molythane® shell provides high wear resistance and the o-ring energizer functions as a spring to maintain sealing contact under low pressure. The Standard PolyPak® utilizes a straight cut scraper lip design formed by a precision trimming process. The scraper edge wipes both fluid film and contamination away from the seal. A wide selection of sizes and alternate compounds allow this profile to match up with many hydraulic applications. The Standard PolyPak® is an economical choice as a stand alone rod or piston seal. With less squeeze force than the Deep or Type B profiles, the Standard PolyPak® can be installed back-to back, in separate glands, for bi-directional sealing. To protect against pressure trapping, it is recommended that the o-ring be removed from the Standard PolyPak® facing the lower pressure side of the application.
Available:
In Stock
Contact us to order
Item#:
461512500531

.531 x .781 x .125" Parker® Molythane Standard Loaded Lip Seal PolyPak®

A square shaped symmetrical squeeze seal with a knife trimmed scraper lip
Parkers® Standard PolyPak® is a squeeze seal with a symmetrical profile for use in either rod or piston applications. The standard Molythane® shell provides high wear resistance and the o-ring energizer functions as a spring to maintain sealing contact under low pressure. The Standard PolyPak® utilizes a straight cut scraper lip design formed by a precision trimming process. The scraper edge wipes both fluid film and contamination away from the seal. A wide selection of sizes and alternate compounds allow this profile to match up with many hydraulic applications. The Standard PolyPak® is an economical choice as a stand alone rod or piston seal. With less squeeze force than the Deep or Type B profiles, the Standard PolyPak® can be installed back-to back, in separate glands, for bi-directional sealing. To protect against pressure trapping, it is recommended that the o-ring be removed from the Standard PolyPak® facing the lower pressure side of the application.
Available:
In Stock
Contact us to order
Item#:
461512500906

.906 x 1.156 x .125" Parker® Molythane Standard Loaded Lip Seal PolyPak®

A square shaped symmetrical squeeze seal with a knife trimmed scraper lip
Parkers® Standard PolyPak® is a squeeze seal with a symmetrical profile for use in either rod or piston applications. The standard Molythane® shell provides high wear resistance and the o-ring energizer functions as a spring to maintain sealing contact under low pressure. The Standard PolyPak® utilizes a straight cut scraper lip design formed by a precision trimming process. The scraper edge wipes both fluid film and contamination away from the seal. A wide selection of sizes and alternate compounds allow this profile to match up with many hydraulic applications. The Standard PolyPak® is an economical choice as a stand alone rod or piston seal. With less squeeze force than the Deep or Type B profiles, the Standard PolyPak® can be installed back-to back, in separate glands, for bi-directional sealing. To protect against pressure trapping, it is recommended that the o-ring be removed from the Standard PolyPak® facing the lower pressure side of the application.
Available:
In Stock
Contact us to order
Item#:
461512501062

1.062 x 1.312 x .125" Parker® Molythane Standard Loaded Lip Seal PolyPak®

A square shaped symmetrical squeeze seal with a knife trimmed scraper lip
Parkers® Standard PolyPak® is a squeeze seal with a symmetrical profile for use in either rod or piston applications. The standard Molythane® shell provides high wear resistance and the o-ring energizer functions as a spring to maintain sealing contact under low pressure. The Standard PolyPak® utilizes a straight cut scraper lip design formed by a precision trimming process. The scraper edge wipes both fluid film and contamination away from the seal. A wide selection of sizes and alternate compounds allow this profile to match up with many hydraulic applications. The Standard PolyPak® is an economical choice as a stand alone rod or piston seal. With less squeeze force than the Deep or Type B profiles, the Standard PolyPak® can be installed back-to back, in separate glands, for bi-directional sealing. To protect against pressure trapping, it is recommended that the o-ring be removed from the Standard PolyPak® facing the lower pressure side of the application.
Available:
In Stock
Contact us to order
Item#:
461512501312

1.312 x 1.562 x .125" Parker® Molythane Standard Loaded Lip Seal PolyPak®

A square shaped symmetrical squeeze seal with a knife trimmed scraper lip
Parkers® Standard PolyPak® is a squeeze seal with a symmetrical profile for use in either rod or piston applications. The standard Molythane® shell provides high wear resistance and the o-ring energizer functions as a spring to maintain sealing contact under low pressure. The Standard PolyPak® utilizes a straight cut scraper lip design formed by a precision trimming process. The scraper edge wipes both fluid film and contamination away from the seal. A wide selection of sizes and alternate compounds allow this profile to match up with many hydraulic applications. The Standard PolyPak® is an economical choice as a stand alone rod or piston seal. With less squeeze force than the Deep or Type B profiles, the Standard PolyPak® can be installed back-to back, in separate glands, for bi-directional sealing. To protect against pressure trapping, it is recommended that the o-ring be removed from the Standard PolyPak® facing the lower pressure side of the application.
Available:
In Stock
Contact us to order
Item#:
461512501625

1.625 x 1.875 x .125" Parker® Molythane Standard Loaded Lip Seal PolyPak®

A square shaped symmetrical squeeze seal with a knife trimmed scraper lip
Parkers® Standard PolyPak® is a squeeze seal with a symmetrical profile for use in either rod or piston applications. The standard Molythane® shell provides high wear resistance and the o-ring energizer functions as a spring to maintain sealing contact under low pressure. The Standard PolyPak® utilizes a straight cut scraper lip design formed by a precision trimming process. The scraper edge wipes both fluid film and contamination away from the seal. A wide selection of sizes and alternate compounds allow this profile to match up with many hydraulic applications. The Standard PolyPak® is an economical choice as a stand alone rod or piston seal. With less squeeze force than the Deep or Type B profiles, the Standard PolyPak® can be installed back-to back, in separate glands, for bi-directional sealing. To protect against pressure trapping, it is recommended that the o-ring be removed from the Standard PolyPak® facing the lower pressure side of the application.
Available:
In Stock
Contact us to order
Item#:
461512501687

1.687 x 1.937 x .125" Parker® Molythane Standard Loaded Lip Seal PolyPak®

A square shaped symmetrical squeeze seal with a knife trimmed scraper lip
Parkers® Standard PolyPak® is a squeeze seal with a symmetrical profile for use in either rod or piston applications. The standard Molythane® shell provides high wear resistance and the o-ring energizer functions as a spring to maintain sealing contact under low pressure. The Standard PolyPak® utilizes a straight cut scraper lip design formed by a precision trimming process. The scraper edge wipes both fluid film and contamination away from the seal. A wide selection of sizes and alternate compounds allow this profile to match up with many hydraulic applications. The Standard PolyPak® is an economical choice as a stand alone rod or piston seal. With less squeeze force than the Deep or Type B profiles, the Standard PolyPak® can be installed back-to back, in separate glands, for bi-directional sealing. To protect against pressure trapping, it is recommended that the o-ring be removed from the Standard PolyPak® facing the lower pressure side of the application.
Available:
In Stock
Contact us to order
Item#:
461512501875

1.875 x 2.125 x .125" Parker® Molythane Standard Loaded Lip Seal PolyPak®

A square shaped symmetrical squeeze seal with a knife trimmed scraper lip
Parkers® Standard PolyPak® is a squeeze seal with a symmetrical profile for use in either rod or piston applications. The standard Molythane® shell provides high wear resistance and the o-ring energizer functions as a spring to maintain sealing contact under low pressure. The Standard PolyPak® utilizes a straight cut scraper lip design formed by a precision trimming process. The scraper edge wipes both fluid film and contamination away from the seal. A wide selection of sizes and alternate compounds allow this profile to match up with many hydraulic applications. The Standard PolyPak® is an economical choice as a stand alone rod or piston seal. With less squeeze force than the Deep or Type B profiles, the Standard PolyPak® can be installed back-to back, in separate glands, for bi-directional sealing. To protect against pressure trapping, it is recommended that the o-ring be removed from the Standard PolyPak® facing the lower pressure side of the application.
Available:
In Stock
Contact us to order
Item#:
461512502375

2.375 x 2.625 x .125" Parker® Molythane Standard Loaded Lip Seal PolyPak®

A square shaped symmetrical squeeze seal with a knife trimmed scraper lip
Parkers® Standard PolyPak® is a squeeze seal with a symmetrical profile for use in either rod or piston applications. The standard Molythane® shell provides high wear resistance and the o-ring energizer functions as a spring to maintain sealing contact under low pressure. The Standard PolyPak® utilizes a straight cut scraper lip design formed by a precision trimming process. The scraper edge wipes both fluid film and contamination away from the seal. A wide selection of sizes and alternate compounds allow this profile to match up with many hydraulic applications. The Standard PolyPak® is an economical choice as a stand alone rod or piston seal. With less squeeze force than the Deep or Type B profiles, the Standard PolyPak® can be installed back-to back, in separate glands, for bi-directional sealing. To protect against pressure trapping, it is recommended that the o-ring be removed from the Standard PolyPak® facing the lower pressure side of the application.
Available:
In Stock
Contact us to order
Item#:
461512503000

3 x 3.25 x .125" Parker® Molythane Standard Loaded Lip Seal PolyPak®

A square shaped symmetrical squeeze seal with a knife trimmed scraper lip
Parkers® Standard PolyPak® is a squeeze seal with a symmetrical profile for use in either rod or piston applications. The standard Molythane® shell provides high wear resistance and the o-ring energizer functions as a spring to maintain sealing contact under low pressure. The Standard PolyPak® utilizes a straight cut scraper lip design formed by a precision trimming process. The scraper edge wipes both fluid film and contamination away from the seal. A wide selection of sizes and alternate compounds allow this profile to match up with many hydraulic applications. The Standard PolyPak® is an economical choice as a stand alone rod or piston seal. With less squeeze force than the Deep or Type B profiles, the Standard PolyPak® can be installed back-to back, in separate glands, for bi-directional sealing. To protect against pressure trapping, it is recommended that the o-ring be removed from the Standard PolyPak® facing the lower pressure side of the application.
Available:
In Stock
Contact us to order
Item#:
461512503250

3.25 x 3.5 x .125" Parker® Molythane Standard Loaded Lip Seal PolyPak®

A square shaped symmetrical squeeze seal with a knife trimmed scraper lip
Parkers® Standard PolyPak® is a squeeze seal with a symmetrical profile for use in either rod or piston applications. The standard Molythane® shell provides high wear resistance and the o-ring energizer functions as a spring to maintain sealing contact under low pressure. The Standard PolyPak® utilizes a straight cut scraper lip design formed by a precision trimming process. The scraper edge wipes both fluid film and contamination away from the seal. A wide selection of sizes and alternate compounds allow this profile to match up with many hydraulic applications. The Standard PolyPak® is an economical choice as a stand alone rod or piston seal. With less squeeze force than the Deep or Type B profiles, the Standard PolyPak® can be installed back-to back, in separate glands, for bi-directional sealing. To protect against pressure trapping, it is recommended that the o-ring be removed from the Standard PolyPak® facing the lower pressure side of the application.
Available:
In Stock
Contact us to order
Item#:
461512504375

4.375 x 4.625 x .125" Parker® Molythane Standard Loaded Lip Seal PolyPak®

A square shaped symmetrical squeeze seal with a knife trimmed scraper lip
Parkers® Standard PolyPak® is a squeeze seal with a symmetrical profile for use in either rod or piston applications. The standard Molythane® shell provides high wear resistance and the o-ring energizer functions as a spring to maintain sealing contact under low pressure. The Standard PolyPak® utilizes a straight cut scraper lip design formed by a precision trimming process. The scraper edge wipes both fluid film and contamination away from the seal. A wide selection of sizes and alternate compounds allow this profile to match up with many hydraulic applications. The Standard PolyPak® is an economical choice as a stand alone rod or piston seal. With less squeeze force than the Deep or Type B profiles, the Standard PolyPak® can be installed back-to back, in separate glands, for bi-directional sealing. To protect against pressure trapping, it is recommended that the o-ring be removed from the Standard PolyPak® facing the lower pressure side of the application.
Available:
In Stock
Contact us to order
Item#:
461512504500

4.5 x 4.75 x .125" Parker® Molythane Standard Loaded Lip Seal PolyPak®

A square shaped symmetrical squeeze seal with a knife trimmed scraper lip
Parkers® Standard PolyPak® is a squeeze seal with a symmetrical profile for use in either rod or piston applications. The standard Molythane® shell provides high wear resistance and the o-ring energizer functions as a spring to maintain sealing contact under low pressure. The Standard PolyPak® utilizes a straight cut scraper lip design formed by a precision trimming process. The scraper edge wipes both fluid film and contamination away from the seal. A wide selection of sizes and alternate compounds allow this profile to match up with many hydraulic applications. The Standard PolyPak® is an economical choice as a stand alone rod or piston seal. With less squeeze force than the Deep or Type B profiles, the Standard PolyPak® can be installed back-to back, in separate glands, for bi-directional sealing. To protect against pressure trapping, it is recommended that the o-ring be removed from the Standard PolyPak® facing the lower pressure side of the application.
Available:
In Stock
Contact us to order
Item#:
461512505750

5.75 x 6 x .125" Parker® Molythane Standard Loaded Lip Seal PolyPak®

A square shaped symmetrical squeeze seal with a knife trimmed scraper lip
Parkers® Standard PolyPak® is a squeeze seal with a symmetrical profile for use in either rod or piston applications. The standard Molythane® shell provides high wear resistance and the o-ring energizer functions as a spring to maintain sealing contact under low pressure. The Standard PolyPak® utilizes a straight cut scraper lip design formed by a precision trimming process. The scraper edge wipes both fluid film and contamination away from the seal. A wide selection of sizes and alternate compounds allow this profile to match up with many hydraulic applications. The Standard PolyPak® is an economical choice as a stand alone rod or piston seal. With less squeeze force than the Deep or Type B profiles, the Standard PolyPak® can be installed back-to back, in separate glands, for bi-directional sealing. To protect against pressure trapping, it is recommended that the o-ring be removed from the Standard PolyPak® facing the lower pressure side of the application.
Available:
In Stock
Contact us to order
Item#:
461515600937

.937 x 1.25 x .156" Parker® Molythane Standard Loaded Lip Seal PolyPak®

A square shaped symmetrical squeeze seal with a knife trimmed scraper lip
Parkers® Standard PolyPak® is a squeeze seal with a symmetrical profile for use in either rod or piston applications. The standard Molythane® shell provides high wear resistance and the o-ring energizer functions as a spring to maintain sealing contact under low pressure. The Standard PolyPak® utilizes a straight cut scraper lip design formed by a precision trimming process. The scraper edge wipes both fluid film and contamination away from the seal. A wide selection of sizes and alternate compounds allow this profile to match up with many hydraulic applications. The Standard PolyPak® is an economical choice as a stand alone rod or piston seal. With less squeeze force than the Deep or Type B profiles, the Standard PolyPak® can be installed back-to back, in separate glands, for bi-directional sealing. To protect against pressure trapping, it is recommended that the o-ring be removed from the Standard PolyPak® facing the lower pressure side of the application.
Available:
In Stock
Contact us to order
Item#:
461515601062

1.062 x 1.375 x .156" Parker® Molythane Standard Loaded Lip Seal PolyPak®

A square shaped symmetrical squeeze seal with a knife trimmed scraper lip
Parkers® Standard PolyPak® is a squeeze seal with a symmetrical profile for use in either rod or piston applications. The standard Molythane® shell provides high wear resistance and the o-ring energizer functions as a spring to maintain sealing contact under low pressure. The Standard PolyPak® utilizes a straight cut scraper lip design formed by a precision trimming process. The scraper edge wipes both fluid film and contamination away from the seal. A wide selection of sizes and alternate compounds allow this profile to match up with many hydraulic applications. The Standard PolyPak® is an economical choice as a stand alone rod or piston seal. With less squeeze force than the Deep or Type B profiles, the Standard PolyPak® can be installed back-to back, in separate glands, for bi-directional sealing. To protect against pressure trapping, it is recommended that the o-ring be removed from the Standard PolyPak® facing the lower pressure side of the application.
Available:
In Stock
Contact us to order
Item#:
461515602062

2.062 x 2.375 x .156" Parker® Molythane Standard Loaded Lip Seal PolyPak®

A square shaped symmetrical squeeze seal with a knife trimmed scraper lip
Parkers® Standard PolyPak® is a squeeze seal with a symmetrical profile for use in either rod or piston applications. The standard Molythane® shell provides high wear resistance and the o-ring energizer functions as a spring to maintain sealing contact under low pressure. The Standard PolyPak® utilizes a straight cut scraper lip design formed by a precision trimming process. The scraper edge wipes both fluid film and contamination away from the seal. A wide selection of sizes and alternate compounds allow this profile to match up with many hydraulic applications. The Standard PolyPak® is an economical choice as a stand alone rod or piston seal. With less squeeze force than the Deep or Type B profiles, the Standard PolyPak® can be installed back-to back, in separate glands, for bi-directional sealing. To protect against pressure trapping, it is recommended that the o-ring be removed from the Standard PolyPak® facing the lower pressure side of the application.
Available:
In Stock
Contact us to order
Item#:
461518700187

.187 x .562 x .187" Parker® Molythane Standard Loaded Lip Seal PolyPak®

A square shaped symmetrical squeeze seal with a knife trimmed scraper lip
Parkers® Standard PolyPak® is a squeeze seal with a symmetrical profile for use in either rod or piston applications. The standard Molythane® shell provides high wear resistance and the o-ring energizer functions as a spring to maintain sealing contact under low pressure. The Standard PolyPak® utilizes a straight cut scraper lip design formed by a precision trimming process. The scraper edge wipes both fluid film and contamination away from the seal. A wide selection of sizes and alternate compounds allow this profile to match up with many hydraulic applications. The Standard PolyPak® is an economical choice as a stand alone rod or piston seal. With less squeeze force than the Deep or Type B profiles, the Standard PolyPak® can be installed back-to back, in separate glands, for bi-directional sealing. To protect against pressure trapping, it is recommended that the o-ring be removed from the Standard PolyPak® facing the lower pressure side of the application.
Available:
In Stock
Contact us to order
Item#:
461518700250

.25 x .625 x .187" Parker® Molythane Standard Loaded Lip Seal PolyPak®

A square shaped symmetrical squeeze seal with a knife trimmed scraper lip
Parkers® Standard PolyPak® is a squeeze seal with a symmetrical profile for use in either rod or piston applications. The standard Molythane® shell provides high wear resistance and the o-ring energizer functions as a spring to maintain sealing contact under low pressure. The Standard PolyPak® utilizes a straight cut scraper lip design formed by a precision trimming process. The scraper edge wipes both fluid film and contamination away from the seal. A wide selection of sizes and alternate compounds allow this profile to match up with many hydraulic applications. The Standard PolyPak® is an economical choice as a stand alone rod or piston seal. With less squeeze force than the Deep or Type B profiles, the Standard PolyPak® can be installed back-to back, in separate glands, for bi-directional sealing. To protect against pressure trapping, it is recommended that the o-ring be removed from the Standard PolyPak® facing the lower pressure side of the application.
Available:
In Stock
Contact us to order
Item#:
461518700312

.312 x .687 x .187" Parker® Molythane Standard Loaded Lip Seal PolyPak®

A square shaped symmetrical squeeze seal with a knife trimmed scraper lip
Parkers® Standard PolyPak® is a squeeze seal with a symmetrical profile for use in either rod or piston applications. The standard Molythane® shell provides high wear resistance and the o-ring energizer functions as a spring to maintain sealing contact under low pressure. The Standard PolyPak® utilizes a straight cut scraper lip design formed by a precision trimming process. The scraper edge wipes both fluid film and contamination away from the seal. A wide selection of sizes and alternate compounds allow this profile to match up with many hydraulic applications. The Standard PolyPak® is an economical choice as a stand alone rod or piston seal. With less squeeze force than the Deep or Type B profiles, the Standard PolyPak® can be installed back-to back, in separate glands, for bi-directional sealing. To protect against pressure trapping, it is recommended that the o-ring be removed from the Standard PolyPak® facing the lower pressure side of the application.
Available:
In Stock
Contact us to order
Item#:
461518700375

.375 x .75 x .187" Parker® Molythane Standard Loaded Lip Seal PolyPak®

A square shaped symmetrical squeeze seal with a knife trimmed scraper lip
Parkers® Standard PolyPak® is a squeeze seal with a symmetrical profile for use in either rod or piston applications. The standard Molythane® shell provides high wear resistance and the o-ring energizer functions as a spring to maintain sealing contact under low pressure. The Standard PolyPak® utilizes a straight cut scraper lip design formed by a precision trimming process. The scraper edge wipes both fluid film and contamination away from the seal. A wide selection of sizes and alternate compounds allow this profile to match up with many hydraulic applications. The Standard PolyPak® is an economical choice as a stand alone rod or piston seal. With less squeeze force than the Deep or Type B profiles, the Standard PolyPak® can be installed back-to back, in separate glands, for bi-directional sealing. To protect against pressure trapping, it is recommended that the o-ring be removed from the Standard PolyPak® facing the lower pressure side of the application.
Available:
In Stock
Contact us to order
Item#:
461518700437

.437 x .812 x .187" Parker® Molythane Standard Loaded Lip Seal PolyPak®

A square shaped symmetrical squeeze seal with a knife trimmed scraper lip
Parkers® Standard PolyPak® is a squeeze seal with a symmetrical profile for use in either rod or piston applications. The standard Molythane® shell provides high wear resistance and the o-ring energizer functions as a spring to maintain sealing contact under low pressure. The Standard PolyPak® utilizes a straight cut scraper lip design formed by a precision trimming process. The scraper edge wipes both fluid film and contamination away from the seal. A wide selection of sizes and alternate compounds allow this profile to match up with many hydraulic applications. The Standard PolyPak® is an economical choice as a stand alone rod or piston seal. With less squeeze force than the Deep or Type B profiles, the Standard PolyPak® can be installed back-to back, in separate glands, for bi-directional sealing. To protect against pressure trapping, it is recommended that the o-ring be removed from the Standard PolyPak® facing the lower pressure side of the application.
Available:
In Stock
Contact us to order
Item#:
461518700656

.656 x 1.031 x .187" Parker® Molythane Standard Loaded Lip Seal PolyPak®

A square shaped symmetrical squeeze seal with a knife trimmed scraper lip
Parkers® Standard PolyPak® is a squeeze seal with a symmetrical profile for use in either rod or piston applications. The standard Molythane® shell provides high wear resistance and the o-ring energizer functions as a spring to maintain sealing contact under low pressure. The Standard PolyPak® utilizes a straight cut scraper lip design formed by a precision trimming process. The scraper edge wipes both fluid film and contamination away from the seal. A wide selection of sizes and alternate compounds allow this profile to match up with many hydraulic applications. The Standard PolyPak® is an economical choice as a stand alone rod or piston seal. With less squeeze force than the Deep or Type B profiles, the Standard PolyPak® can be installed back-to back, in separate glands, for bi-directional sealing. To protect against pressure trapping, it is recommended that the o-ring be removed from the Standard PolyPak® facing the lower pressure side of the application.
Available:
In Stock
Contact us to order
Item#:
461518700812

.812 x 1.187 x .187" Parker® Molythane Standard Loaded Lip Seal PolyPak®

A square shaped symmetrical squeeze seal with a knife trimmed scraper lip
Parkers® Standard PolyPak® is a squeeze seal with a symmetrical profile for use in either rod or piston applications. The standard Molythane® shell provides high wear resistance and the o-ring energizer functions as a spring to maintain sealing contact under low pressure. The Standard PolyPak® utilizes a straight cut scraper lip design formed by a precision trimming process. The scraper edge wipes both fluid film and contamination away from the seal. A wide selection of sizes and alternate compounds allow this profile to match up with many hydraulic applications. The Standard PolyPak® is an economical choice as a stand alone rod or piston seal. With less squeeze force than the Deep or Type B profiles, the Standard PolyPak® can be installed back-to back, in separate glands, for bi-directional sealing. To protect against pressure trapping, it is recommended that the o-ring be removed from the Standard PolyPak® facing the lower pressure side of the application.
Available:
In Stock
Contact us to order
Item#:
461518700875

.875 x 1.25 x .187" Parker® Molythane Standard Loaded Lip Seal PolyPak®

A square shaped symmetrical squeeze seal with a knife trimmed scraper lip
Parkers® Standard PolyPak® is a squeeze seal with a symmetrical profile for use in either rod or piston applications. The standard Molythane® shell provides high wear resistance and the o-ring energizer functions as a spring to maintain sealing contact under low pressure. The Standard PolyPak® utilizes a straight cut scraper lip design formed by a precision trimming process. The scraper edge wipes both fluid film and contamination away from the seal. A wide selection of sizes and alternate compounds allow this profile to match up with many hydraulic applications. The Standard PolyPak® is an economical choice as a stand alone rod or piston seal. With less squeeze force than the Deep or Type B profiles, the Standard PolyPak® can be installed back-to back, in separate glands, for bi-directional sealing. To protect against pressure trapping, it is recommended that the o-ring be removed from the Standard PolyPak® facing the lower pressure side of the application.
Available:
In Stock
Contact us to order
|◀ 1 - 36 of 257 ▶|
View:

Allegheny York Hydraulic Seals