View:
Profile C1 rod seals are a good choice for hydraulic and pneumatic equipment that require seals with the smallest possible housings. Although cross sections and heights are very small, the sealing performance is excellent. Extremely low friction is experienced because of the short contact area at the sealing surface. Installation: These rod seals are manufactured oversized on the external diameters in relation to the nominal dimensions. This ensures the required tight fit, and eliminates heel drag on the dynamic surface. Only after installation will the sealing lip diameter show the desired dimensions. Profile C1 rod seals may easily be snapped into the groove. Standard material is 84 durometer nitrile, and may be used at a temperature rangeof -65 to +220 degrees F in hydraulic applications and -65 to +180 degrees F in pneumatic applications. Maximum workingpressure for hydraulic use is 2350 psi and for pneumatic useis 235 psi. Temperature: -65°F to 220°F (see above) Pressure: 0 to 2350 psi (see above)
Available:
In Stock
Your Price:
0.00
Each
Contact us to order
Profile C1 rod seals are a good choice for hydraulic and pneumatic equipment that require seals with the smallest possible housings. Although cross sections and heights are very small, the sealing performance is excellent. Extremely low friction is experienced because of the short contact area at the sealing surface. Installation: These rod seals are manufactured oversized on the external diameters in relation to the nominal dimensions. This ensures the required tight fit, and eliminates heel drag on the dynamic surface. Only after installation will the sealing lip diameter show the desired dimensions. Profile C1 rod seals may easily be snapped into the groove. Standard material is 84 durometer nitrile, and may be used at a temperature rangeof -65 to +220 degrees F in hydraulic applications and -65 to +180 degrees F in pneumatic applications. Maximum workingpressure for hydraulic use is 2350 psi and for pneumatic useis 235 psi. Temperature: -65°F to 220°F (see above) Pressure: 0 to 2350 psi (see above)
Available:
Out Of Stock
Your Price:
0.00
Each
Contact us to order
Profile C1 rod seals are a good choice for hydraulic and pneumatic equipment that require seals with the smallest possible housings. Although cross sections and heights are very small, the sealing performance is excellent. Extremely low friction is experienced because of the short contact area at the sealing surface. Installation: These rod seals are manufactured oversized on the external diameters in relation to the nominal dimensions. This ensures the required tight fit, and eliminates heel drag on the dynamic surface. Only after installation will the sealing lip diameter show the desired dimensions. Profile C1 rod seals may easily be snapped into the groove. Standard material is 84 durometer nitrile, and may be used at a temperature rangeof -65 to +220 degrees F in hydraulic applications and -65 to +180 degrees F in pneumatic applications. Maximum workingpressure for hydraulic use is 2350 psi and for pneumatic useis 235 psi. Temperature: -65°F to 220°F (see above) Pressure: 0 to 2350 psi (see above)
Available:
In Stock
Your Price:
0.00
Each
Contact us to order
Profile C1 rod seals are a good choice for hydraulic and pneumatic equipment that require seals with the smallest possible housings. Although cross sections and heights are very small, the sealing performance is excellent. Extremely low friction is experienced because of the short contact area at the sealing surface. Installation: These rod seals are manufactured oversized on the external diameters in relation to the nominal dimensions. This ensures the required tight fit, and eliminates heel drag on the dynamic surface. Only after installation will the sealing lip diameter show the desired dimensions. Profile C1 rod seals may easily be snapped into the groove. Standard material is 84 durometer nitrile, and may be used at a temperature rangeof -65 to +220 degrees F in hydraulic applications and -65 to +180 degrees F in pneumatic applications. Maximum workingpressure for hydraulic use is 2350 psi and for pneumatic useis 235 psi. Temperature: -65°F to 220°F (see above) Pressure: 0 to 2350 psi (see above)
Available:
In Stock
Your Price:
0.00
Each
Contact us to order
Profile C1 rod seals are a good choice for hydraulic and pneumatic equipment that require seals with the smallest possible housings. Although cross sections and heights are very small, the sealing performance is excellent. Extremely low friction is experienced because of the short contact area at the sealing surface. Installation: These rod seals are manufactured oversized on the external diameters in relation to the nominal dimensions. This ensures the required tight fit, and eliminates heel drag on the dynamic surface. Only after installation will the sealing lip diameter show the desired dimensions. Profile C1 rod seals may easily be snapped into the groove. Standard material is 84 durometer nitrile, and may be used at a temperature rangeof -65 to +220 degrees F in hydraulic applications and -65 to +180 degrees F in pneumatic applications. Maximum workingpressure for hydraulic use is 2350 psi and for pneumatic useis 235 psi. Temperature: -65°F to 220°F (see above) Pressure: 0 to 2350 psi (see above)
Available:
In Stock
Your Price:
0.00
Each
Contact us to order
Profile C1 rod seals are a good choice for hydraulic and pneumatic equipment that require seals with the smallest possible housings. Although cross sections and heights are very small, the sealing performance is excellent. Extremely low friction is experienced because of the short contact area at the sealing surface. Installation: These rod seals are manufactured oversized on the external diameters in relation to the nominal dimensions. This ensures the required tight fit, and eliminates heel drag on the dynamic surface. Only after installation will the sealing lip diameter show the desired dimensions. Profile C1 rod seals may easily be snapped into the groove. Standard material is 84 durometer nitrile, and may be used at a temperature rangeof -65 to +220 degrees F in hydraulic applications and -65 to +180 degrees F in pneumatic applications. Maximum workingpressure for hydraulic use is 2350 psi and for pneumatic useis 235 psi. Temperature: -65°F to 220°F (see above) Pressure: 0 to 2350 psi (see above)
Available:
Out Of Stock
Your Price:
0.00
Each
Contact us to order
Profile C1 rod seals are a good choice for hydraulic and pneumatic equipment that require seals with the smallest possible housings. Although cross sections and heights are very small, the sealing performance is excellent. Extremely low friction is experienced because of the short contact area at the sealing surface. Installation: These rod seals are manufactured oversized on the external diameters in relation to the nominal dimensions. This ensures the required tight fit, and eliminates heel drag on the dynamic surface. Only after installation will the sealing lip diameter show the desired dimensions. Profile C1 rod seals may easily be snapped into the groove. Standard material is 84 durometer nitrile, and may be used at a temperature rangeof -65 to +220 degrees F in hydraulic applications and -65 to +180 degrees F in pneumatic applications. Maximum workingpressure for hydraulic use is 2350 psi and for pneumatic useis 235 psi. Temperature: -65°F to 220°F (see above) Pressure: 0 to 2350 psi (see above)
Available:
Out Of Stock
Your Price:
0.00
Each
Contact us to order
Profile C1 rod seals are a good choice for hydraulic and pneumatic equipment that require seals with the smallest possible housings. Although cross sections and heights are very small, the sealing performance is excellent. Extremely low friction is experienced because of the short contact area at the sealing surface. Installation: These rod seals are manufactured oversized on the external diameters in relation to the nominal dimensions. This ensures the required tight fit, and eliminates heel drag on the dynamic surface. Only after installation will the sealing lip diameter show the desired dimensions. Profile C1 rod seals may easily be snapped into the groove. Standard material is 84 durometer nitrile, and may be used at a temperature rangeof -65 to +220 degrees F in hydraulic applications and -65 to +180 degrees F in pneumatic applications. Maximum workingpressure for hydraulic use is 2350 psi and for pneumatic useis 235 psi. Temperature: -65°F to 220°F (see above) Pressure: 0 to 2350 psi (see above)
Available:
Out Of Stock
Your Price:
0.00
Each
Contact us to order
Profile C1 rod seals are a good choice for hydraulic and pneumatic equipment that require seals with the smallest possible housings. Although cross sections and heights are very small, the sealing performance is excellent. Extremely low friction is experienced because of the short contact area at the sealing surface. Installation: These rod seals are manufactured oversized on the external diameters in relation to the nominal dimensions. This ensures the required tight fit, and eliminates heel drag on the dynamic surface. Only after installation will the sealing lip diameter show the desired dimensions. Profile C1 rod seals may easily be snapped into the groove. Standard material is 84 durometer nitrile, and may be used at a temperature rangeof -65 to +220 degrees F in hydraulic applications and -65 to +180 degrees F in pneumatic applications. Maximum workingpressure for hydraulic use is 2350 psi and for pneumatic useis 235 psi. Temperature: -65°F to 220°F (see above) Pressure: 0 to 2350 psi (see above)
Available:
In Stock
Your Price:
0.00
Each
Contact us to order
Profile C1 rod seals are a good choice for hydraulic and pneumatic equipment that require seals with the smallest possible housings. Although cross sections and heights are very small, the sealing performance is excellent. Extremely low friction is experienced because of the short contact area at the sealing surface. Installation: These rod seals are manufactured oversized on the external diameters in relation to the nominal dimensions. This ensures the required tight fit, and eliminates heel drag on the dynamic surface. Only after installation will the sealing lip diameter show the desired dimensions. Profile C1 rod seals may easily be snapped into the groove. Standard material is 84 durometer nitrile, and may be used at a temperature rangeof -65 to +220 degrees F in hydraulic applications and -65 to +180 degrees F in pneumatic applications. Maximum workingpressure for hydraulic use is 2350 psi and for pneumatic useis 235 psi. Temperature: -65°F to 220°F (see above) Pressure: 0 to 2350 psi (see above)
Available:
In Stock
Your Price:
0.00
Each
Contact us to order
Profile C1 rod seals are a good choice for hydraulic and pneumatic equipment that require seals with the smallest possible housings. Although cross sections and heights are very small, the sealing performance is excellent. Extremely low friction is experienced because of the short contact area at the sealing surface. Installation: These rod seals are manufactured oversized on the external diameters in relation to the nominal dimensions. This ensures the required tight fit, and eliminates heel drag on the dynamic surface. Only after installation will the sealing lip diameter show the desired dimensions. Profile C1 rod seals may easily be snapped into the groove. Standard material is 84 durometer nitrile, and may be used at a temperature rangeof -65 to +220 degrees F in hydraulic applications and -65 to +180 degrees F in pneumatic applications. Maximum workingpressure for hydraulic use is 2350 psi and for pneumatic useis 235 psi. Temperature: -65°F to 220°F (see above) Pressure: 0 to 2350 psi (see above)
Available:
Out Of Stock
Your Price:
0.00
Each
Contact us to order
Profile C1 rod seals are a good choice for hydraulic and pneumatic equipment that require seals with the smallest possible housings. Although cross sections and heights are very small, the sealing performance is excellent. Extremely low friction is experienced because of the short contact area at the sealing surface. Installation: These rod seals are manufactured oversized on the external diameters in relation to the nominal dimensions. This ensures the required tight fit, and eliminates heel drag on the dynamic surface. Only after installation will the sealing lip diameter show the desired dimensions. Profile C1 rod seals may easily be snapped into the groove. Standard material is 84 durometer nitrile, and may be used at a temperature rangeof -65 to +220 degrees F in hydraulic applications and -65 to +180 degrees F in pneumatic applications. Maximum workingpressure for hydraulic use is 2350 psi and for pneumatic useis 235 psi. Temperature: -65°F to 220°F (see above) Pressure: 0 to 2350 psi (see above)
Available:
Out Of Stock
Your Price:
0.00
Each
Contact us to order
Profile C1 rod seals are a good choice for hydraulic and pneumatic equipment that require seals with the smallest possible housings. Although cross sections and heights are very small, the sealing performance is excellent. Extremely low friction is experienced because of the short contact area at the sealing surface. Installation: These rod seals are manufactured oversized on the external diameters in relation to the nominal dimensions. This ensures the required tight fit, and eliminates heel drag on the dynamic surface. Only after installation will the sealing lip diameter show the desired dimensions. Profile C1 rod seals may easily be snapped into the groove. Standard material is 84 durometer nitrile, and may be used at a temperature rangeof -65 to +220 degrees F in hydraulic applications and -65 to +180 degrees F in pneumatic applications. Maximum workingpressure for hydraulic use is 2350 psi and for pneumatic useis 235 psi. Temperature: -65°F to 220°F (see above) Pressure: 0 to 2350 psi (see above)
Available:
Out Of Stock
Your Price:
0.00
Each
Contact us to order
Profile C1 rod seals are a good choice for hydraulic and pneumatic equipment that require seals with the smallest possible housings. Although cross sections and heights are very small, the sealing performance is excellent. Extremely low friction is experienced because of the short contact area at the sealing surface. Installation: These rod seals are manufactured oversized on the external diameters in relation to the nominal dimensions. This ensures the required tight fit, and eliminates heel drag on the dynamic surface. Only after installation will the sealing lip diameter show the desired dimensions. Profile C1 rod seals may easily be snapped into the groove. Standard material is 84 durometer nitrile, and may be used at a temperature rangeof -65 to +220 degrees F in hydraulic applications and -65 to +180 degrees F in pneumatic applications. Maximum workingpressure for hydraulic use is 2350 psi and for pneumatic useis 235 psi. Temperature: -65°F to 220°F (see above) Pressure: 0 to 2350 psi (see above)
Available:
In Stock
Your Price:
0.00
Each
Contact us to order
Profile C1 rod seals are a good choice for hydraulic and pneumatic equipment that require seals with the smallest possible housings. Although cross sections and heights are very small, the sealing performance is excellent. Extremely low friction is experienced because of the short contact area at the sealing surface. Installation: These rod seals are manufactured oversized on the external diameters in relation to the nominal dimensions. This ensures the required tight fit, and eliminates heel drag on the dynamic surface. Only after installation will the sealing lip diameter show the desired dimensions. Profile C1 rod seals may easily be snapped into the groove. Standard material is 84 durometer nitrile, and may be used at a temperature rangeof -65 to +220 degrees F in hydraulic applications and -65 to +180 degrees F in pneumatic applications. Maximum workingpressure for hydraulic use is 2350 psi and for pneumatic useis 235 psi. Temperature: -65°F to 220°F (see above) Pressure: 0 to 2350 psi (see above)
Available:
In Stock
Your Price:
0.00
Each
Contact us to order
Profile C1 rod seals are a good choice for hydraulic and pneumatic equipment that require seals with the smallest possible housings. Although cross sections and heights are very small, the sealing performance is excellent. Extremely low friction is experienced because of the short contact area at the sealing surface. Installation: These rod seals are manufactured oversized on the external diameters in relation to the nominal dimensions. This ensures the required tight fit, and eliminates heel drag on the dynamic surface. Only after installation will the sealing lip diameter show the desired dimensions. Profile C1 rod seals may easily be snapped into the groove. Standard material is 84 durometer nitrile, and may be used at a temperature rangeof -65 to +220 degrees F in hydraulic applications and -65 to +180 degrees F in pneumatic applications. Maximum workingpressure for hydraulic use is 2350 psi and for pneumatic useis 235 psi. Temperature: -65°F to 220°F (see above) Pressure: 0 to 2350 psi (see above)
Available:
Out Of Stock
Your Price:
0.00
Each
Contact us to order
Profile C1 rod seals are a good choice for hydraulic and pneumatic equipment that require seals with the smallest possible housings. Although cross sections and heights are very small, the sealing performance is excellent. Extremely low friction is experienced because of the short contact area at the sealing surface. Installation: These rod seals are manufactured oversized on the external diameters in relation to the nominal dimensions. This ensures the required tight fit, and eliminates heel drag on the dynamic surface. Only after installation will the sealing lip diameter show the desired dimensions. Profile C1 rod seals may easily be snapped into the groove. Standard material is 84 durometer nitrile, and may be used at a temperature rangeof -65 to +220 degrees F in hydraulic applications and -65 to +180 degrees F in pneumatic applications. Maximum workingpressure for hydraulic use is 2350 psi and for pneumatic useis 235 psi. Temperature: -65°F to 220°F (see above) Pressure: 0 to 2350 psi (see above)
Available:
In Stock
Your Price:
0.00
Each
Contact us to order
Profile C1 rod seals are a good choice for hydraulic and pneumatic equipment that require seals with the smallest possible housings. Although cross sections and heights are very small, the sealing performance is excellent. Extremely low friction is experienced because of the short contact area at the sealing surface. Installation: These rod seals are manufactured oversized on the external diameters in relation to the nominal dimensions. This ensures the required tight fit, and eliminates heel drag on the dynamic surface. Only after installation will the sealing lip diameter show the desired dimensions. Profile C1 rod seals may easily be snapped into the groove. Standard material is 84 durometer nitrile, and may be used at a temperature rangeof -65 to +220 degrees F in hydraulic applications and -65 to +180 degrees F in pneumatic applications. Maximum workingpressure for hydraulic use is 2350 psi and for pneumatic useis 235 psi. Temperature: -65°F to 220°F (see above) Pressure: 0 to 2350 psi (see above)
Available:
In Stock
Your Price:
0.00
Each
Contact us to order
Profile C1 rod seals are a good choice for hydraulic and pneumatic equipment that require seals with the smallest possible housings. Although cross sections and heights are very small, the sealing performance is excellent. Extremely low friction is experienced because of the short contact area at the sealing surface. Installation: These rod seals are manufactured oversized on the external diameters in relation to the nominal dimensions. This ensures the required tight fit, and eliminates heel drag on the dynamic surface. Only after installation will the sealing lip diameter show the desired dimensions. Profile C1 rod seals may easily be snapped into the groove. Standard material is 84 durometer nitrile, and may be used at a temperature rangeof -65 to +220 degrees F in hydraulic applications and -65 to +180 degrees F in pneumatic applications. Maximum workingpressure for hydraulic use is 2350 psi and for pneumatic useis 235 psi. Temperature: -65°F to 220°F (see above) Pressure: 0 to 2350 psi (see above)
Available:
In Stock
Your Price:
0.00
Each
Contact us to order
Profile C1 rod seals are a good choice for hydraulic and pneumatic equipment that require seals with the smallest possible housings. Although cross sections and heights are very small, the sealing performance is excellent. Extremely low friction is experienced because of the short contact area at the sealing surface. Installation: These rod seals are manufactured oversized on the external diameters in relation to the nominal dimensions. This ensures the required tight fit, and eliminates heel drag on the dynamic surface. Only after installation will the sealing lip diameter show the desired dimensions. Profile C1 rod seals may easily be snapped into the groove. Standard material is 84 durometer nitrile, and may be used at a temperature rangeof -65 to +220 degrees F in hydraulic applications and -65 to +180 degrees F in pneumatic applications. Maximum workingpressure for hydraulic use is 2350 psi and for pneumatic useis 235 psi. Temperature: -65°F to 220°F (see above) Pressure: 0 to 2350 psi (see above)
Available:
In Stock
Your Price:
0.00
Each
Contact us to order
Profile C1 rod seals are a good choice for hydraulic and pneumatic equipment that require seals with the smallest possible housings. Although cross sections and heights are very small, the sealing performance is excellent. Extremely low friction is experienced because of the short contact area at the sealing surface. Installation: These rod seals are manufactured oversized on the external diameters in relation to the nominal dimensions. This ensures the required tight fit, and eliminates heel drag on the dynamic surface. Only after installation will the sealing lip diameter show the desired dimensions. Profile C1 rod seals may easily be snapped into the groove. Standard material is 84 durometer nitrile, and may be used at a temperature rangeof -65 to +220 degrees F in hydraulic applications and -65 to +180 degrees F in pneumatic applications. Maximum workingpressure for hydraulic use is 2350 psi and for pneumatic useis 235 psi. Temperature: -65°F to 220°F (see above) Pressure: 0 to 2350 psi (see above)
Available:
In Stock
Your Price:
0.00
Each
Contact us to order
Profile C1 rod seals are a good choice for hydraulic and pneumatic equipment that require seals with the smallest possible housings. Although cross sections and heights are very small, the sealing performance is excellent. Extremely low friction is experienced because of the short contact area at the sealing surface. Installation: These rod seals are manufactured oversized on the external diameters in relation to the nominal dimensions. This ensures the required tight fit, and eliminates heel drag on the dynamic surface. Only after installation will the sealing lip diameter show the desired dimensions. Profile C1 rod seals may easily be snapped into the groove. Standard material is 84 durometer nitrile, and may be used at a temperature rangeof -65 to +220 degrees F in hydraulic applications and -65 to +180 degrees F in pneumatic applications. Maximum workingpressure for hydraulic use is 2350 psi and for pneumatic useis 235 psi. Temperature: -65°F to 220°F (see above) Pressure: 0 to 2350 psi (see above)
Available:
Out Of Stock
Your Price:
0.00
Each
Contact us to order
Profile C1 rod seals are a good choice for hydraulic and pneumatic equipment that require seals with the smallest possible housings. Although cross sections and heights are very small, the sealing performance is excellent. Extremely low friction is experienced because of the short contact area at the sealing surface. Installation: These rod seals are manufactured oversized on the external diameters in relation to the nominal dimensions. This ensures the required tight fit, and eliminates heel drag on the dynamic surface. Only after installation will the sealing lip diameter show the desired dimensions. Profile C1 rod seals may easily be snapped into the groove. Standard material is 84 durometer nitrile, and may be used at a temperature rangeof -65 to +220 degrees F in hydraulic applications and -65 to +180 degrees F in pneumatic applications. Maximum workingpressure for hydraulic use is 2350 psi and for pneumatic useis 235 psi. Temperature: -65°F to 220°F (see above) Pressure: 0 to 2350 psi (see above)
Available:
In Stock
Your Price:
0.00
Each
Contact us to order
Profile C1 rod seals are a good choice for hydraulic and pneumatic equipment that require seals with the smallest possible housings. Although cross sections and heights are very small, the sealing performance is excellent. Extremely low friction is experienced because of the short contact area at the sealing surface. Installation: These rod seals are manufactured oversized on the external diameters in relation to the nominal dimensions. This ensures the required tight fit, and eliminates heel drag on the dynamic surface. Only after installation will the sealing lip diameter show the desired dimensions. Profile C1 rod seals may easily be snapped into the groove. Standard material is 84 durometer nitrile, and may be used at a temperature rangeof -65 to +220 degrees F in hydraulic applications and -65 to +180 degrees F in pneumatic applications. Maximum workingpressure for hydraulic use is 2350 psi and for pneumatic useis 235 psi. Temperature: -65°F to 220°F (see above) Pressure: 0 to 2350 psi (see above)
Available:
Out Of Stock
Your Price:
0.00
Each
Contact us to order
Profile C1 rod seals are a good choice for hydraulic and pneumatic equipment that require seals with the smallest possible housings. Although cross sections and heights are very small, the sealing performance is excellent. Extremely low friction is experienced because of the short contact area at the sealing surface. Installation: These rod seals are manufactured oversized on the external diameters in relation to the nominal dimensions. This ensures the required tight fit, and eliminates heel drag on the dynamic surface. Only after installation will the sealing lip diameter show the desired dimensions. Profile C1 rod seals may easily be snapped into the groove. Standard material is 84 durometer nitrile, and may be used at a temperature rangeof -65 to +220 degrees F in hydraulic applications and -65 to +180 degrees F in pneumatic applications. Maximum workingpressure for hydraulic use is 2350 psi and for pneumatic useis 235 psi. Temperature: -65°F to 220°F (see above) Pressure: 0 to 2350 psi (see above)
Available:
Out Of Stock
Your Price:
0.00
Each
Contact us to order
Profile C1 rod seals are a good choice for hydraulic and pneumatic equipment that require seals with the smallest possible housings. Although cross sections and heights are very small, the sealing performance is excellent. Extremely low friction is experienced because of the short contact area at the sealing surface. Installation: These rod seals are manufactured oversized on the external diameters in relation to the nominal dimensions. This ensures the required tight fit, and eliminates heel drag on the dynamic surface. Only after installation will the sealing lip diameter show the desired dimensions. Profile C1 rod seals may easily be snapped into the groove. Standard material is 84 durometer nitrile, and may be used at a temperature rangeof -65 to +220 degrees F in hydraulic applications and -65 to +180 degrees F in pneumatic applications. Maximum workingpressure for hydraulic use is 2350 psi and for pneumatic useis 235 psi. Temperature: -65°F to 220°F (see above) Pressure: 0 to 2350 psi (see above)
Available:
In Stock
Your Price:
0.00
Each
Contact us to order
Profile C1 rod seals are a good choice for hydraulic and pneumatic equipment that require seals with the smallest possible housings. Although cross sections and heights are very small, the sealing performance is excellent. Extremely low friction is experienced because of the short contact area at the sealing surface. Installation: These rod seals are manufactured oversized on the external diameters in relation to the nominal dimensions. This ensures the required tight fit, and eliminates heel drag on the dynamic surface. Only after installation will the sealing lip diameter show the desired dimensions. Profile C1 rod seals may easily be snapped into the groove. Standard material is 84 durometer nitrile, and may be used at a temperature rangeof -65 to +220 degrees F in hydraulic applications and -65 to +180 degrees F in pneumatic applications. Maximum workingpressure for hydraulic use is 2350 psi and for pneumatic useis 235 psi. Temperature: -65°F to 220°F (see above) Pressure: 0 to 2350 psi (see above)
Available:
Out Of Stock
Your Price:
0.00
Each
Contact us to order
Profile C1 rod seals are a good choice for hydraulic and pneumatic equipment that require seals with the smallest possible housings. Although cross sections and heights are very small, the sealing performance is excellent. Extremely low friction is experienced because of the short contact area at the sealing surface. Installation: These rod seals are manufactured oversized on the external diameters in relation to the nominal dimensions. This ensures the required tight fit, and eliminates heel drag on the dynamic surface. Only after installation will the sealing lip diameter show the desired dimensions. Profile C1 rod seals may easily be snapped into the groove. Standard material is 84 durometer nitrile, and may be used at a temperature rangeof -65 to +220 degrees F in hydraulic applications and -65 to +180 degrees F in pneumatic applications. Maximum workingpressure for hydraulic use is 2350 psi and for pneumatic useis 235 psi. Temperature: -65°F to 220°F (see above) Pressure: 0 to 2350 psi (see above)
Available:
Out Of Stock
Your Price:
0.00
Each
Contact us to order
Profile C1 rod seals are a good choice for hydraulic and pneumatic equipment that require seals with the smallest possible housings. Although cross sections and heights are very small, the sealing performance is excellent. Extremely low friction is experienced because of the short contact area at the sealing surface. Installation: These rod seals are manufactured oversized on the external diameters in relation to the nominal dimensions. This ensures the required tight fit, and eliminates heel drag on the dynamic surface. Only after installation will the sealing lip diameter show the desired dimensions. Profile C1 rod seals may easily be snapped into the groove. Standard material is 84 durometer nitrile, and may be used at a temperature rangeof -65 to +220 degrees F in hydraulic applications and -65 to +180 degrees F in pneumatic applications. Maximum workingpressure for hydraulic use is 2350 psi and for pneumatic useis 235 psi. Temperature: -65°F to 220°F (see above) Pressure: 0 to 2350 psi (see above)
Available:
Out Of Stock
Your Price:
0.00
Each
Contact us to order
Profile C1 rod seals are a good choice for hydraulic and pneumatic equipment that require seals with the smallest possible housings. Although cross sections and heights are very small, the sealing performance is excellent. Extremely low friction is experienced because of the short contact area at the sealing surface. Installation: These rod seals are manufactured oversized on the external diameters in relation to the nominal dimensions. This ensures the required tight fit, and eliminates heel drag on the dynamic surface. Only after installation will the sealing lip diameter show the desired dimensions. Profile C1 rod seals may easily be snapped into the groove. Standard material is 84 durometer nitrile, and may be used at a temperature rangeof -65 to +220 degrees F in hydraulic applications and -65 to +180 degrees F in pneumatic applications. Maximum workingpressure for hydraulic use is 2350 psi and for pneumatic useis 235 psi. Temperature: -65°F to 220°F (see above) Pressure: 0 to 2350 psi (see above)
Available:
In Stock
Your Price:
0.00
Each
Contact us to order
Profile C1 rod seals are a good choice for hydraulic and pneumatic equipment that require seals with the smallest possible housings. Although cross sections and heights are very small, the sealing performance is excellent. Extremely low friction is experienced because of the short contact area at the sealing surface. Installation: These rod seals are manufactured oversized on the external diameters in relation to the nominal dimensions. This ensures the required tight fit, and eliminates heel drag on the dynamic surface. Only after installation will the sealing lip diameter show the desired dimensions. Profile C1 rod seals may easily be snapped into the groove. Standard material is 84 durometer nitrile, and may be used at a temperature rangeof -65 to +220 degrees F in hydraulic applications and -65 to +180 degrees F in pneumatic applications. Maximum workingpressure for hydraulic use is 2350 psi and for pneumatic useis 235 psi. Temperature: -65°F to 220°F (see above) Pressure: 0 to 2350 psi (see above)
Available:
Out Of Stock
Your Price:
0.00
Each
Contact us to order
Profile C1 rod seals are a good choice for hydraulic and pneumatic equipment that require seals with the smallest possible housings. Although cross sections and heights are very small, the sealing performance is excellent. Extremely low friction is experienced because of the short contact area at the sealing surface. Installation: These rod seals are manufactured oversized on the external diameters in relation to the nominal dimensions. This ensures the required tight fit, and eliminates heel drag on the dynamic surface. Only after installation will the sealing lip diameter show the desired dimensions. Profile C1 rod seals may easily be snapped into the groove. Standard material is 84 durometer nitrile, and may be used at a temperature rangeof -65 to +220 degrees F in hydraulic applications and -65 to +180 degrees F in pneumatic applications. Maximum workingpressure for hydraulic use is 2350 psi and for pneumatic useis 235 psi. Temperature: -65°F to 220°F (see above) Pressure: 0 to 2350 psi (see above)
Available:
Out Of Stock
Your Price:
0.00
Each
Contact us to order
Profile C1 rod seals are a good choice for hydraulic and pneumatic equipment that require seals with the smallest possible housings. Although cross sections and heights are very small, the sealing performance is excellent. Extremely low friction is experienced because of the short contact area at the sealing surface. Installation: These rod seals are manufactured oversized on the external diameters in relation to the nominal dimensions. This ensures the required tight fit, and eliminates heel drag on the dynamic surface. Only after installation will the sealing lip diameter show the desired dimensions. Profile C1 rod seals may easily be snapped into the groove. Standard material is 84 durometer nitrile, and may be used at a temperature rangeof -65 to +220 degrees F in hydraulic applications and -65 to +180 degrees F in pneumatic applications. Maximum workingpressure for hydraulic use is 2350 psi and for pneumatic useis 235 psi. Temperature: -65°F to 220°F (see above) Pressure: 0 to 2350 psi (see above)
Available:
Out Of Stock
Your Price:
0.00
Each
Contact us to order
Profile C1 rod seals are a good choice for hydraulic and pneumatic equipment that require seals with the smallest possible housings. Although cross sections and heights are very small, the sealing performance is excellent. Extremely low friction is experienced because of the short contact area at the sealing surface. Installation: These rod seals are manufactured oversized on the external diameters in relation to the nominal dimensions. This ensures the required tight fit, and eliminates heel drag on the dynamic surface. Only after installation will the sealing lip diameter show the desired dimensions. Profile C1 rod seals may easily be snapped into the groove. Standard material is 84 durometer nitrile, and may be used at a temperature rangeof -65 to +220 degrees F in hydraulic applications and -65 to +180 degrees F in pneumatic applications. Maximum workingpressure for hydraulic use is 2350 psi and for pneumatic useis 235 psi. Temperature: -65°F to 220°F (see above) Pressure: 0 to 2350 psi (see above)
Available:
In Stock
Your Price:
0.00
Each
Contact us to order
Profile C1 rod seals are a good choice for hydraulic and pneumatic equipment that require seals with the smallest possible housings. Although cross sections and heights are very small, the sealing performance is excellent. Extremely low friction is experienced because of the short contact area at the sealing surface. Installation: These rod seals are manufactured oversized on the external diameters in relation to the nominal dimensions. This ensures the required tight fit, and eliminates heel drag on the dynamic surface. Only after installation will the sealing lip diameter show the desired dimensions. Profile C1 rod seals may easily be snapped into the groove. Standard material is 84 durometer nitrile, and may be used at a temperature rangeof -65 to +220 degrees F in hydraulic applications and -65 to +180 degrees F in pneumatic applications. Maximum workingpressure for hydraulic use is 2350 psi and for pneumatic useis 235 psi. Temperature: -65°F to 220°F (see above) Pressure: 0 to 2350 psi (see above)
Available:
In Stock
Your Price:
0.00
Each
Contact us to order
Profile C1 rod seals are a good choice for hydraulic and pneumatic equipment that require seals with the smallest possible housings. Although cross sections and heights are very small, the sealing performance is excellent. Extremely low friction is experienced because of the short contact area at the sealing surface. Installation: These rod seals are manufactured oversized on the external diameters in relation to the nominal dimensions. This ensures the required tight fit, and eliminates heel drag on the dynamic surface. Only after installation will the sealing lip diameter show the desired dimensions. Profile C1 rod seals may easily be snapped into the groove. Standard material is 84 durometer nitrile, and may be used at a temperature rangeof -65 to +220 degrees F in hydraulic applications and -65 to +180 degrees F in pneumatic applications. Maximum workingpressure for hydraulic use is 2350 psi and for pneumatic useis 235 psi. Temperature: -65°F to 220°F (see above) Pressure: 0 to 2350 psi (see above)
Available:
Out Of Stock
Your Price:
0.00
Each
Contact us to order
View: