View:
Item#:
PSP-210

1 x 0.75 x 0.187 2 Pc Polyurethane/NBR Piston Seal Assembly - Inch

1" Bore 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
6.52
Each
Item#:
PSP-212

1.125 x 0.875 x 0.187 2 Pc Polyurethane/NBR Piston Seal Assembly - Inch

1.125" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
6.95
Each
Item#:
PSP-214

1.25 x 1 x 0.187 2 Pc Polyurethane/NBR Piston Seal Assembly - Inch

1.25" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
7.61
Each
Item#:
PSP-216

1.375 x 1.125 x 0.187 2 Pc Polyurethane/NBR Piston Seal Assembly - Inch

1.375" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
8.03
Each
Item#:
PSP-218

1.5 x 1.25 x 0.187 2 Pc Polyurethane/NBR Piston Seal Assembly - Inch

1.5" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
8.52
Each
Item#:
PSP-220

1.625 x 1.375 x 0.187 2 Pc Polyurethane/NBR Piston Seal Assembly - Inch

1.625" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
8.88
Each
Item#:
PSP-222

1.75 x 1.5 x 0.187 2 Pc Polyurethane/NBR Piston Seal Assembly - Inch

1.75" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
9.78
Each
Item#:
PSP-326

2 x 1.625 x 0.281 2 Pc Polyurethane/NBR Piston Seal Assembly - Inch

2" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
10.99
Each
Item#:
PSP-328

2.25 x 1.875 x 0.281 2 Pc Polyurethane/NBR Piston Seal Assembly - Inch

2.25" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
12.80
Each
Item#:
PSP-329

2.375 x 2 x 0.281 2 Pc Polyurethane/NBR Piston Seal Assembly - Inch

2.375" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
13.65
Each
Item#:
PSP-330

2.5 x 2.125 x 0.281 2 Pc Polyurethane/NBR Piston Seal Assembly - Inch

2.5" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
14.68
Each
Item#:
PSP-331

2.625 x 2.25 x 0.281 2 Pc Polyurethane/NBR Piston Seal Assembly - Inch

2.625" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
15.28
Each
Item#:
PSP-332

2.75 x 2.375 x 0.281 2 Pc Polyurethane/NBR Piston Seal Assembly - Inch

2.75" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
15.46
Each
Item#:
PSP-334

3 x 2.625 x 0.281 2 Pc Polyurethane/NBR Piston Seal Assembly - Inch

3" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
17.09
Each
Item#:
PSP-335

3.125 x 2.75 x 0.281 2 Pc Polyurethane/NBR Piston Seal Assembly - Inch

3.125" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
17.82
Each
Item#:
PSP-336

3.25 x 2.875 x 0.281 2 Pc Polyurethane/NBR Piston Seal Assembly - Inch

3.25" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
18.96
Each
Item#:
PSP-338

3.5 x 3.125 x 0.281 2 Pc Polyurethane/NBR Piston Seal Assembly - Inch

3.5" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
19.57
Each
Item#:
PSP-340

3.75 x 3.375 x 0.281 2 Pc Polyurethane/NBR Piston Seal Assembly - Inch

3.75" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
21.98
Each
Item#:
PSP-342

4 x 3.625 x 0.281 2 Pc Polyurethane/NBR Piston Seal Assembly - Inch

4" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
25.79
Each
Item#:
PSP-344

4.25 x 3.875 x 0.281 2 Pc Polyurethane/NBR Piston Seal Assembly - Inch

4.25" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
27.84
Each
Item#:
PSP-346

4.5 x 4.125 x 0.281 2 Pc Polyurethane/NBR Piston Seal Assembly - Inch

4.5" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
30.38
Each
Item#:
PSP-348

4.75 x 4.375 x 0.281 2 Pc Polyurethane/NBR Piston Seal Assembly - Inch

4.75" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
32.61
Each
Item#:
PSP-350

5.002 x 4.625 x 0.281 2 Pc Polyurethane/NBR Piston Seal Assembly - Inch

5.002" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
36.72
Each
Item#:
PSP-425

5.002 x 4.5 x 0.375 2 Pc Polyurethane/NBR Piston Seal Assembly - Inch

5.002" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
40.47
Each
Item#:
PSP-427

5.252 x 4.75 x 0.375 2 Pc Polyurethane/NBR Piston Seal Assembly - Inch

5.252" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
43.31
Each
Item#:
PSP-429

5.502 x 5 x 0.375 2 Pc Polyurethane/NBR Piston Seal Assembly - Inch

5.502" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
53.33
Each
Item#:
PSP-433

6.002 x 5.5 x 0.375 2 Pc Polyurethane/NBR Piston Seal Assembly - Inch

6.002" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
55.99
Each
Item#:
PSP-435

6-1/4" x 5.778 x .375 URETHANE

2PC BI-DIRECTION PISTON SEAL
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
58.55
Each
Item#:
PSP-437

6.502 x 6 x 0.375 2 Pc Polyurethane/NBR Piston Seal Assembly - Inch

6.502" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
61.12
Each
Item#:
PSP-439

7.002 x 6.5 x 0.375 2 Pc Polyurethane/NBR Piston Seal Assembly - Inch

7.002" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
65.05
Each
Item#:
PSP-441

7.5 x 7 x 0.375 2 Pc Polyurethane/NBR Piston Seal Assembly - Inch

7.5" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
77.31
Each
Item#:
PSP-448

10 x 9.5 x 0.375 2 Pc Polyurethane/NBR Piston Seal Assembly - Inch

10" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
101.59
Each
View: