Allegheny York Seals and Packing

|◀ 1 - 36 of 2388 ▶|
View:
Item#:
187KCORD N70

3/16" Base NBR K-Wiper Cord N70 - Sold By The Foot

Sold By The Foot
This 70 durometer nitrile extrusion is available in two cross sections for those non-standard rod applications and will interchange into standard K and 7580 wiper grooves. Temperature: -40° to 250°F
Available:
In Stock
Your Price:
3.49
Foot
Item#:
187UCORD N70

3/16" Base NBR U-Wiper Cord N70 - Sold By The Foot

Sold By The Foot
This 70 durometer nitrile extrusion is available for those nonstandard rod applications and some telescopic cylinders and will interchange into a standard U-wiper groove. Temperature: -40° to 250°F
Available:
In Stock
Your Price:
3.50
Foot
Item#:
250KCORD N70

1/4" Base NBR K-Wiper Cord N70 - Sold By The Foot

Sold By The Foot
This 70 durometer nitrile extrusion is available in two cross sections for those non-standard rod applications and will interchange into standard K and 7580 wiper grooves. Temperature: -40° to 250°F
Available:
In Stock
Your Price:
4.51
Foot
These urethane wipers are used in car carrier cylinder applications. Temperature: -65° to 200°F
Available:
In Stock
Your Price:
4.64
Each
These urethane wipers are used in car carrier cylinder applications. Temperature: -65° to 200°F
Available:
In Stock
Your Price:
5.71
Each
This general purpose wiper has a lip designed to remove lightly adhered dirt, dust, and moisture from the rod. Manufactured from a hard nitrile rubber, suitable for installing in grooved housings, creates an effective seal onhousings as well as rods. Temperature -22°F to +212°F
Available:
In Stock
Your Price:
8.13
Each
This general purpose wiper has a lip designed to remove lightly adhered dirt, dust, and moisture from the rod. Manufactured from a hard nitrile rubber, suitable for installing in grooved housings, creates an effective seal onhousings as well as rods. Temperature -22°F to +212°F
Available:
In Stock
Your Price:
9.10
Each
This general purpose wiper has a lip designed to remove lightly adhered dirt, dust, and moisture from the rod. Manufactured from a hard nitrile rubber, suitable for installing in grooved housings, creates an effective seal onhousings as well as rods. Temperature -22°F to +212°F
Available:
In Stock
Your Price:
9.35
Each
This general purpose wiper has a lip designed to remove lightly adhered dirt, dust, and moisture from the rod. Manufactured from a hard nitrile rubber, suitable for installing in grooved housings, creates an effective seal onhousings as well as rods. Temperature -22°F to +212°F
Available:
In Stock
Your Price:
9.64
Each
This general purpose wiper has a lip designed to remove lightly adhered dirt, dust, and moisture from the rod. Manufactured from a hard nitrile rubber, suitable for installing in grooved housings, creates an effective seal onhousings as well as rods. Temperature -22°F to +212°F
Available:
In Stock
Your Price:
9.99
Each
This general purpose wiper has a lip designed to remove lightly adhered dirt, dust, and moisture from the rod. Manufactured from a hard nitrile rubber, suitable for installing in grooved housings, creates an effective seal onhousings as well as rods. Temperature -22°F to +212°F
Available:
Out Of Stock
ETA:
08/31/2018
Your Price:
10.29
Each
Item#:
33-28753375-125
Manufacturer Item:
0537900

2.875 x 3.375 x 0.125 Rectangular Base General Purpose NBR Wiper - Inch

This general purpose wiper has a lip designed to remove lightly adhered dirt, dust, and moisture from the rod. Manufactured from a hard nitrile rubber, suitable for installing in grooved housings, creates an effective seal on housings as well as rods. Temperature -22°F to +212°F
Available:
In Stock
Your Price:
24.98
Each
This general purpose wiper has a lip designed to remove lightly adhered dirt, dust, and moisture from the rod. Manufactured from a hard nitrile rubber, suitable for installing in grooved housings, creates an effective seal onhousings as well as rods. Temperature -22°F to +212°F
Available:
In Stock
Your Price:
17.04
Each
This general purpose wiper has a lip designed to remove lightly adhered dirt, dust, and moisture from the rod. Manufactured from a hard nitrile rubber, suitable for installing in grooved housings, creates an effective seal onhousings as well as rods. Temperature -22øF to +212øF
Available:
In Stock
Your Price:
18.82
Each
This general purpose wiper has a lip designed to remove lightly adhered dirt, dust, and moisture from the rod. Manufactured from a hard nitrile rubber, suitable for installing in grooved housings, creates an effective seal onhousings as well as rods. Temperature -22°F to +212°F
Available:
In Stock
Your Price:
20.49
Each
This general purpose wiper has a lip designed to remove lightly adhered dirt, dust, and moisture from the rod. Manufactured from a hard nitrile rubber, suitable for installing in grooved housings, creates an effective seal onhousings as well as rods. Temperature -22°F to +212°F
Available:
In Stock
Your Price:
53.30
Each
This general purpose wiper has a lip designed to remove lightly adhered dirt, dust, and moisture from the rod. Manufactured from a hard nitrile rubber, suitable for installing in grooved housings, creates an effective seal onhousings as well as rods. Temperature -22°F to +212°F
Available:
Out Of Stock
ETA:
08/31/2018
Your Price:
61.98
Each
For heavy-duty protection against hard contaminants such as ice, mud or metal spattering, the self-adjusting Seal-Guard® “scraper” is an ideal exclusion ring. Seal-Guard® consists of two knife-like bronze rings and a nitrile cushion ring. To eliminate the clogging and caking of contaminants under the ring, the conically tapered bronzerings act as blades to remove and dispose of foreign matteraway from the rod and ring. The notches in the bronze rings provide flexibility, allow for expansion and produce a spring effect resulting in constant contact with the rod, full circle. When compressed, the cushion ring preloads the wiper rings for wiper edge contact with the rod and it absorbs shock and side loads; therefore, it’s self-adjusting. To install the Seal-Guard® wiper, cut a groove in the gland, install the bronze rings, staggering the notches. Then using a dull tool and a light film of oil,push the cushion ring into the counterbore under the retaining ring. Temperature: -40° to 250°F.
Available:
In Stock
Your Price:
21.67
Each
For heavy-duty protection against hard contaminants such as ice, mud or metal spattering, the self-adjusting Seal-Guard® “scraper” is an ideal exclusion ring. Seal-Guard® consists of two knife-like bronze rings and a nitrile cushion ring. To eliminate the clogging and caking of contaminants under the ring, the conically tapered bronzerings act as blades to remove and dispose of foreign matteraway from the rod and ring. The notches in the bronze rings provide flexibility, allow for expansion and produce a spring effect resulting in constant contact with the rod, full circle. When compressed, the cushion ring preloads the wiper rings for wiper edge contact with the rod and it absorbs shock and side loads; therefore, it’s self-adjusting. To install the Seal-Guard® wiper, cut a groove in the gland, install the bronze rings, staggering the notches. Then using a dull tool and a light film of oil,push the cushion ring into the counterbore under the retaining ring. Temperature: -40° to 250°F.
Available:
In Stock
Your Price:
19.60
Each
For heavy-duty protection against hard contaminants such as ice, mud or metal spattering, the self-adjusting Seal-Guard® “scraper” is an ideal exclusion ring. Seal-Guard® consists of two knife-like bronze rings and a nitrile cushion ring. To eliminate the clogging and caking of contaminants under the ring, the conically tapered bronzerings act as blades to remove and dispose of foreign matteraway from the rod and ring. The notches in the bronze rings provide flexibility, allow for expansion and produce a spring effect resulting in constant contact with the rod, full circle. When compressed, the cushion ring preloads the wiper rings for wiper edge contact with the rod and it absorbs shock and side loads; therefore, it’s self-adjusting. To install the Seal-Guard® wiper, cut a groove in the gland, install the bronze rings, staggering the notches. Then using a dull tool and a light film of oil,push the cushion ring into the counterbore under the retaining ring. Temperature: -40° to 250°F.
Available:
In Stock
Your Price:
51.69
Each
For heavy-duty protection against hard contaminants such as ice, mud or metal spattering, the self-adjusting Seal-Guard® “scraper” is an ideal exclusion ring. Seal-Guard® consists of two knife-like bronze rings and a nitrile cushion ring. To eliminate the clogging and caking of contaminants under the ring, the conically tapered bronzerings act as blades to remove and dispose of foreign matteraway from the rod and ring. The notches in the bronze rings provide flexibility, allow for expansion and produce a spring effect resulting in constant contact with the rod, full circle. When compressed, the cushion ring preloads the wiper rings for wiper edge contact with the rod and it absorbs shock and side loads; therefore, it’s self-adjusting. To install the Seal-Guard® wiper, cut a groove in the gland, install the bronze rings, staggering the notches. Then using a dull tool and a light film of oil,push the cushion ring into the counterbore under the retaining ring. Temperature: -40° to 250°F.
Available:
In Stock
Your Price:
44.29
Each
For heavy-duty protection against hard contaminants such as ice, mud or metal spattering, the self-adjusting Seal-Guard® “scraper” is an ideal exclusion ring. Seal-Guard® consists of two knife-like bronze rings and a nitrile cushion ring. To eliminate the clogging and caking of contaminants under the ring, the conically tapered bronzerings act as blades to remove and dispose of foreign matteraway from the rod and ring. The notches in the bronze rings provide flexibility, allow for expansion and produce a spring effect resulting in constant contact with the rod, full circle. When compressed, the cushion ring preloads the wiper rings for wiper edge contact with the rod and it absorbs shock and side loads; therefore, it’s self-adjusting. To install the Seal-Guard® wiper, cut a groove in the gland, install the bronze rings, staggering the notches. Then using a dull tool and a light film of oil,push the cushion ring into the counterbore under the retaining ring. Temperature: -40° to 250°F.
Available:
In Stock
Your Price:
55.17
Each
These U Type Non-Stand. Urethane Wipers are used in mobilehydraulic applications. Temperature: -65° to 200°F
Available:
In Stock
Your Price:
22.21
Each
The SC style wiper / scraper consists of a self-aligning brass scraper and a nitrile wiping lip assembled together and securely clamped into a steel shell. This scraper removes sticky and abrasive contaminants such as ice, mud, and tar from cylinder rods, while the nitrile lip removes water, dust, and other abrasive matter too small to be blocked by the scraper. Temperature: -40° to 250°F.
Available:
In Stock
Your Price:
35.96
Each
The SC style wiper / scraper consists of a self-aligning brass scraper and a nitrile wiping lip assembled together and securely clamped into a steel shell. This scraper removes sticky and abrasive contaminants such as ice, mud, and tar from cylinder rods, while the nitrile lip removes water, dust, and other abrasive matter too small to be blocked by the scraper. Temperature: -40° to 250°F.
Available:
In Stock
Your Price:
38.01
Each
The SC style wiper / scraper consists of a self-aligning brass scraper and a nitrile wiping lip assembled together and securely clamped into a steel shell. This scraper removes sticky and abrasive contaminants such as ice, mud, and tar from cylinder rods, while the nitrile lip removes water, dust, and other abrasive matter too small to be blocked by the scraper. Temperature: -40° to 250°F.
Available:
In Stock
Your Price:
37.76
Each
The SC style wiper / scraper consists of a self-aligning brass scraper and a nitrile wiping lip assembled together and securely clamped into a steel shell. This scraper removes sticky and abrasive contaminants such as ice, mud, and tar from cylinder rods, while the nitrile lip removes water, dust, and other abrasive matter too small to be blocked by the scraper. Temperature: -40° to 250°F.
Available:
In Stock
Your Price:
43.74
Each
The SC style wiper / scraper consists of a self-aligning brass scraper and a nitrile wiping lip assembled together and securely clamped into a steel shell. This scraper removes sticky and abrasive contaminants such as ice, mud, and tar from cylinder rods, while the nitrile lip removes water, dust, and other abrasive matter too small to be blocked by the scraper. Temperature: -40° to 250°F.
Available:
In Stock
Your Price:
45.26
Each
The SC style wiper / scraper consists of a self-aligning brass scraper and a nitrile wiping lip assembled together and securely clamped into a steel shell. This scraper removes sticky and abrasive contaminants such as ice, mud, and tar from cylinder rods, while the nitrile lip removes water, dust, and other abrasive matter too small to be blocked by the scraper. Temperature: -40° to 250°F.
Available:
In Stock
Your Price:
44.77
Each
The SC style wiper / scraper consists of a self-aligning brass scraper and a nitrile wiping lip assembled together and securely clamped into a steel shell. This scraper removes sticky and abrasive contaminants such as ice, mud, and tar from cylinder rods, while the nitrile lip removes water, dust, and other abrasive matter too small to be blocked by the scraper. Temperature: -40° to 250°F.
Available:
In Stock
Your Price:
46.53
Each
The SC style wiper / scraper consists of a self-aligning brass scraper and a nitrile wiping lip assembled together and securely clamped into a steel shell. This scraper removes sticky and abrasive contaminants such as ice, mud, and tar from cylinder rods, while the nitrile lip removes water, dust, and other abrasive matter too small to be blocked by the scraper. Temperature: -40° to 250°F.
Available:
In Stock
Your Price:
48.71
Each
The SC style wiper / scraper consists of a self-aligning brass scraper and a nitrile wiping lip assembled together and securely clamped into a steel shell. This scraper removes sticky and abrasive contaminants such as ice, mud, and tar from cylinder rods, while the nitrile lip removes water, dust, and other abrasive matter too small to be blocked by the scraper. Temperature: -40° to 250°F.
Available:
In Stock
Your Price:
52.52
Each
The SC style wiper / scraper consists of a self-aligning brass scraper and a nitrile wiping lip assembled together and securely clamped into a steel shell. This scraper removes sticky and abrasive contaminants such as ice, mud, and tar from cylinder rods, while the nitrile lip removes water, dust, and other abrasive matter too small to be blocked by the scraper. Temperature: -40° to 250°F.
Available:
In Stock
Your Price:
73.25
Each
The SC style wiper / scraper consists of a self-aligning brass scraper and a nitrile wiping lip assembled together and securely clamped into a steel shell. This scraper removes sticky and abrasive contaminants such as ice, mud, and tar from cylinder rods, while the nitrile lip removes water, dust, and other abrasive matter too small to be blocked by the scraper. Temperature: -40° to 250°F.
Available:
In Stock
Your Price:
61.25
Each
The SC style wiper / scraper consists of a self-aligning brass scraper and a nitrile wiping lip assembled together and securely clamped into a steel shell. This scraper removes sticky and abrasive contaminants such as ice, mud, and tar from cylinder rods, while the nitrile lip removes water, dust, and other abrasive matter too small to be blocked by the scraper. Temperature: -40° to 250°F.
Available:
In Stock
Your Price:
62.78
Each
The SC style wiper / scraper consists of a self-aligning brass scraper and a nitrile wiping lip assembled together and securely clamped into a steel shell. This scraper removes sticky and abrasive contaminants such as ice, mud, and tar from cylinder rods, while the nitrile lip removes water, dust, and other abrasive matter too small to be blocked by the scraper. Temperature: -40° to 250°F.
Available:
In Stock
Your Price:
62.12
Each
|◀ 1 - 36 of 2388 ▶|
View: