|◀ 1 - 36 of 614 ▶|
View:
CAT® - Type Stepped TFE Buffer Rings
Available:
In Stock
Your Price:
13.98
Each
These urethane buffer rings are rectangular shaped in profile. They are most commonly used in combination with a u-cup as a rod seal. Their purpose is to protect the rod seal from contaminants as well as to apply a hydraulic “load” to the u-cup. Some of these urethane rings are used as a backup ring combined with a rubber sealing ring in suspension cylinder applications. Part numbers starting witha G are used in Case® equipment; the others are typically used in Caterpillar® equipment. Temperature: -40°F to 225°F Pressure: 0 to 5000 psi
Available:
In Stock
Your Price:
18.93
Each
These urethane buffer rings are rectangular shaped in profile. They are most commonly used in combination with a u-cup as a rod seal. Their purpose is to protect the rod seal from contaminants as well as to apply a hydraulic “load” to the u-cup. Some of these urethane rings are used as a backup ring combined with a rubber sealing ring in suspension cylinder applications. Part numbers starting witha G are used in Case® equipment; the others are typically used in Caterpillar® equipment. Temperature: -40°F to 225°F Pressure: 0 to 5000 psi
Available:
Out Of Stock
Your Price:
60.21
Each
These urethane buffer rings are rectangular shaped in profile. They are most commonly used in combination with a u-cup as a rod seal. Their purpose is to protect the rod seal from contaminants as well as to apply a hydraulic “load” to the u-cup. Some of these urethane rings are used as a backup ring combined with a rubber sealing ring in suspension cylinder applications. Part numbers starting witha G are used in Case® equipment; the others are typically used in Caterpillar® equipment. Temperature: -40°F to 225°F Pressure: 0 to 5000 psi
Available:
Out Of Stock
Your Price:
64.49
Each
These urethane buffer rings are rectangular shaped in profile. They are most commonly used in combination with a u-cup as a rod seal. Their purpose is to protect the rod seal from contaminants as well as to apply a hydraulic “load” to the u-cup. Some of these urethane rings are used as a backup ring combined with a rubber sealing ring in suspension cylinder applications. Part numbers starting witha G are used in Case® equipment; the others are typically used in Caterpillar® equipment. Temperature: -40°F to 225°F Pressure: 0 to 5000 psi
Available:
In Stock
Your Price:
23.94
Each
These urethane buffer rings are rectangular shaped in profile. They are most commonly used in combination with a u-cup as a rod seal. Their purpose is to protect the rod seal from contaminants as well as to apply a hydraulic “load” to the u-cup. Some of these urethane rings are used as a backup ring combined with a rubber sealing ring in suspension cylinder applications. Part numbers starting witha G are used in Case® equipment; the others are typically used in Caterpillar® equipment. Temperature: -40°F to 225°F Pressure: 0 to 5000 psi
Available:
Out Of Stock
Your Price:
39.26
Each
These urethane buffer rings are rectangular shaped in profile. They are most commonly used in combination with a u-cup as a rod seal. Their purpose is to protect the rod seal from contaminants as well as to apply a hydraulic “load” to the u-cup. Some of these urethane rings are used as a backup ring combined with a rubber sealing ring in suspension cylinder applications. Part numbers starting witha G are used in Case® equipment; the others are typically used in Caterpillar® equipment. Temperature: -40°F to 225°F Pressure: 0 to 5000 psi
Available:
In Stock
Your Price:
42.16
Each
These nitrile buffer rings are rectangular shaped in profile. They are most commonly used in combination with a u-cup as a rod seal. Their purpose is to protect the rod seal from contaminants as well as to apply a hydraulic “load” to the u-cup. Some of these urethane rings are used as a backup ring combined with a rubber sealing ring in suspension cylinder applications. Part numbers starting witha G are used in Case® equipment; the others are typically used in Caterpillar® equipment. Temperature: -40°F to 225°F Pressure: 0 to 5000 psi
Available:
In Stock
Your Price:
43.30
Each
These urethane buffer rings are rectangular shaped in profile. They are most commonly used in combination with a u-cup as a rod seal. Their purpose is to protect the rod seal from contaminants as well as to apply a hydraulic “load” to the u-cup. Some of these urethane rings are used as a backup ring combined with a rubber sealing ring in suspension cylinder applications. Part numbers starting witha G are used in Case® equipment; the others are typically used in Caterpillar® equipment. Temperature: -40°F to 225°F Pressure: 0 to 5000 psi
Available:
In Stock
Your Price:
53.23
Each
These urethane buffer rings are rectangular shaped in profile. They are most commonly used in combination with a u-cup as a rod seal. Their purpose is to protect the rod seal from contaminants as well as to apply a hydraulic “load” to the u-cup. Some of these urethane rings are used as a backup ring combined with a rubber sealing ring in suspension cylinder applications. Part numbers starting witha G are used in Case® equipment; the others are typically used in Caterpillar® equipment. Temperature: -40°F to 225°F Pressure: 0 to 5000 psi
Available:
In Stock
Your Price:
31.38
Each
These urethane buffer rings are rectangular shaped in profile. They are most commonly used in combination with a u-cup as a rod seal. Their purpose is to protect the rod seal from contaminants as well as to apply a hydraulic “load” to the u-cup. Some of these urethane rings are used as a backup ring combined with a rubber sealing ring in suspension cylinder applications. Part numbers starting witha G are used in Case® equipment; the others are typically used in Caterpillar® equipment. Temperature: -40°F to 225°F Pressure: 0 to 5000 psi
Available:
In Stock
Your Price:
12.40
Each
These urethane buffer rings are rectangular shaped in profile. They are most commonly used in combination with a u-cup as a rod seal. Their purpose is to protect the rod seal from contaminants as well as to apply a hydraulic “load” to the u-cup. Some of these urethane rings are used as a backup ring combined with a rubber sealing ring in suspension cylinder applications. Part numbers starting witha G are used in Case® equipment; the others are typically used in Caterpillar® equipment. Temperature: -40°F to 225°F Pressure: 0 to 5000 psi
Available:
In Stock
Your Price:
18.06
Each
These urethane buffer rings are rectangular shaped in profile. They are most commonly used in combination with a u-cup as a rod seal. Their purpose is to protect the rod seal from contaminants as well as to apply a hydraulic “load” to the u-cup. Some of these urethane rings are used as a backup ring combined with a rubber sealing ring in suspension cylinder applications. Part numbers starting witha G are used in Case® equipment; the others are typically used in Caterpillar® equipment. Temperature: -40°F to 225°F Pressure: 0 to 5000 psi
Available:
In Stock
Your Price:
38.91
Each
These urethane buffer rings are rectangular shaped in profile. They are most commonly used in combination with a u-cup as a rod seal. Their purpose is to protect the rod seal from contaminants as well as to apply a hydraulic “load” to the u-cup. Some of these urethane rings are used as a backup ring combined with a rubber sealing ring in suspension cylinder applications. Part numbers starting witha G are used in Case® equipment; the others are typically used in Caterpillar® equipment. Temperature: -40°F to 225°F Pressure: 0 to 5000 psi
Available:
In Stock
Your Price:
17.77
Each
These urethane buffer rings are rectangular shaped in profile. They are most commonly used in combination with a u-cup as a rod seal. Their purpose is to protect the rod seal from contaminants as well as to apply a hydraulic “load” to the u-cup. Some of these urethane rings are used as a backup ring combined with a rubber sealing ring in suspension cylinder applications. Part numbers starting witha G are used in Case® equipment; the others are typically used in Caterpillar® equipment. Temperature: -40°F to 225°F Pressure: 0 to 5000 psi
Available:
In Stock
Your Price:
12.40
Each
CAT® - Type Stepped TFE Buffer Rings
Available:
In Stock
Your Price:
52.08
Each
These urethane buffer rings are rectangular shaped in profile. They are most commonly used in combination with a u-cup as a rod seal. Their purpose is to protect the rod seal from contaminants as well as to apply a hydraulic “load” to the u-cup. Some of these urethane rings are used as a backup ring combined with a rubber sealing ring in suspension cylinder applications. Part numbers starting witha G are used in Case® equipment; the others are typically used in Caterpillar® equipment. Temperature: -40°F to 225°F Pressure: 0 to 5000 psi
Available:
In Stock
Your Price:
16.55
Each
These urethane buffer rings are rectangular shaped in profile. They are most commonly used in combination with a u-cup as a rod seal. Their purpose is to protect the rod seal from contaminants as well as to apply a hydraulic “load” to the u-cup. Some of these urethane rings are used as a backup ring combined with a rubber sealing ring in suspension cylinder applications. Part numbers starting witha G are used in Case® equipment; the others are typically used in Caterpillar® equipment. Temperature: -40°F to 225°F Pressure: 0 to 5000 psi
Available:
In Stock
Your Price:
17.94
Each
These urethane buffer rings are rectangular shaped in profile. They are most commonly used in combination with a u-cup as a rod seal. Their purpose is to protect the rod seal from contaminants as well as to apply a hydraulic “load” to the u-cup. Some of these urethane rings are used as a backup ring combined with a rubber sealing ring in suspension cylinder applications. Part numbers starting witha G are used in Case® equipment; the others are typically used in Caterpillar® equipment. Temperature: -40°F to 225°F Pressure: 0 to 5000 psi
Available:
In Stock
Your Price:
17.88
Each
These urethane buffer rings are rectangular shaped in profile. They are most commonly used in combination with a u-cup as a rod seal. Their purpose is to protect the rod seal from contaminants as well as to apply a hydraulic “load” to the u-cup. Some of these urethane rings are used as a backup ring combined with a rubber sealing ring in suspension cylinder applications. Part numbers starting witha G are used in Case® equipment; the others are typically used in Caterpillar® equipment. Temperature: -40°F to 225°F Pressure: 0 to 5000 psi
Available:
In Stock
Your Price:
17.21
Each
These urethane buffer rings are rectangular shaped in profile. They are most commonly used in combination with a u-cup as a rod seal. Their purpose is to protect the rod seal from contaminants as well as to apply a hydraulic “load” to the u-cup. Some of these urethane rings are used as a backup ring combined with a rubber sealing ring in suspension cylinder applications. Part numbers starting witha G are used in Case® equipment; the others are typically used in Caterpillar® equipment. Temperature: -40°F to 225°F Pressure: 0 to 5000 psi
Available:
In Stock
Your Price:
8.63
Each
These urethane buffer rings are rectangular shaped in profile. They are most commonly used in combination with a u-cup as a rod seal. Their purpose is to protect the rod seal from contaminants as well as to apply a hydraulic “load” to the u-cup. Some of these urethane rings are used as a backup ring combined with a rubber sealing ring in suspension cylinder applications. Part numbers starting witha G are used in Case® equipment; the others are typically used in Caterpillar® equipment. Temperature: -40°F to 225°F Pressure: 0 to 5000 psi
Available:
In Stock
Your Price:
17.88
Each
These urethane buffer rings are rectangular shaped in profile. They are most commonly used in combination with a u-cup as a rod seal. Their purpose is to protect the rod seal from contaminants as well as to apply a hydraulic “load” to the u-cup. Some of these urethane rings are used as a backup ring combined with a rubber sealing ring in suspension cylinder applications. Part numbers starting witha G are used in Case® equipment; the others are typically used in Caterpillar® equipment. Temperature: -40°F to 225°F Pressure: 0 to 5000 psi
Available:
In Stock
Your Price:
41.85
Each
These urethane buffer rings are rectangular shaped in profile. They are most commonly used in combination with a u-cup as a rod seal. Their purpose is to protect the rod seal from contaminants as well as to apply a hydraulic “load” to the u-cup. Some of these urethane rings are used as a backup ring combined with a rubber sealing ring in suspension cylinder applications. Part numbers starting witha G are used in Case® equipment; the others are typically used in Caterpillar® equipment. Temperature: -40°F to 225°F Pressure: 0 to 5000 psi
Available:
In Stock
Your Price:
29.81
Each
These urethane buffer rings are rectangular shaped in profile. They are most commonly used in combination with a u-cup as a rod seal. Their purpose is to protect the rod seal from contaminants as well as to apply a hydraulic “load” to the u-cup. Some of these urethane rings are used as a backup ring combined with a rubber sealing ring in suspension cylinder applications. Part numbers starting witha G are used in Case® equipment; the others are typically used in Caterpillar® equipment. Temperature: -40°F to 225°F Pressure: 0 to 5000 psi
Available:
In Stock
Your Price:
8.72
Each
These urethane buffer rings are rectangular shaped in profile. They are most commonly used in combination with a u-cup as a rod seal. Their purpose is to protect the rod seal from contaminants as well as to apply a hydraulic “load” to the u-cup. Some of these urethane rings are used as a backup ring combined with a rubber sealing ring in suspension cylinder applications. Part numbers starting witha G are used in Case® equipment; the others are typically used in Caterpillar® equipment. Temperature: -40°F to 225°F Pressure: 0 to 5000 psi
Available:
In Stock
Your Price:
6.87
Each
These nitrile buffer rings are rectangular shaped in profile. They are most commonly used in combination with a u-cup as a rod seal. Their purpose is to protect the rod seal from contaminants as well as to apply a hydraulic “load” to the u-cup. Some of these urethane rings are used as a backup ring combined with a rubber sealing ring in suspension cylinder applications. Part numbers starting witha G are used in Case® equipment; the others are typically used in Caterpillar® equipment. Temperature: -40°F to 225°F Pressure: 0 to 5000 psi
Available:
Out Of Stock
Your Price:
21.92
Each
These urethane buffer rings are rectangular shaped in profile. They are most commonly used in combination with a u-cup as a rod seal. Their purpose is to protect the rod seal from contaminants as well as to apply a hydraulic “load” to the u-cup. Some of these urethane rings are used as a backup ring combined with a rubber sealing ring in suspension cylinder applications. Part numbers starting witha G are used in Case® equipment; the others are typically used in Caterpillar® equipment. Temperature: -40°F to 225°F Pressure: 0 to 5000 psi
Available:
In Stock
Your Price:
24.12
Each
These nitrile buffer rings are rectangular shaped in profile. They are most commonly used in combination with a u-cup as a rod seal. Their purpose is to protect the rod seal from contaminants as well as to apply a hydraulic “load” to the u-cup. Some of these urethane rings are used as a backup ring combined with a rubber sealing ring in suspension cylinder applications. Part numbers starting witha G are used in Case® equipment; the others are typically used in Caterpillar® equipment. Temperature: -40°F to 225°F Pressure: 0 to 5000 psi
Available:
Out Of Stock
Your Price:
32.45
Each
These urethane buffer rings are rectangular shaped in profile. They are most commonly used in combination with a u-cup as a rod seal. Their purpose is to protect the rod seal from contaminants as well as to apply a hydraulic “load” to the u-cup. Some of these urethane rings are used as a backup ring combined with a rubber sealing ring in suspension cylinder applications. Part numbers starting witha G are used in Case® equipment; the others are typically used in Caterpillar® equipment. Temperature: -40°F to 225°F Pressure: 0 to 5000 psi
Available:
In Stock
Your Price:
33.03
Each
These urethane buffer rings are rectangular shaped in profile. They are most commonly used in combination with a u-cup as a rod seal. Their purpose is to protect the rod seal from contaminants as well as to apply a hydraulic “load” to the u-cup. Some of these urethane rings are used as a backup ring combined with a rubber sealing ring in suspension cylinder applications. Part numbers starting witha G are used in Case® equipment; the others are typically used in Caterpillar® equipment. Temperature: -40°F to 225°F Pressure: 0 to 5000 psi
Available:
In Stock
Your Price:
33.73
Each
These nitrile buffer rings are rectangular shaped in profile. They are most commonly used in combination with a u-cup as a rod seal. Their purpose is to protect the rod seal from contaminants as well as to apply a hydraulic “load” to the u-cup. Some of these urethane rings are used as a backup ring combined with a rubber sealing ring in suspension cylinder applications. Part numbers starting witha G are used in Case® equipment; the others are typically used in Caterpillar® equipment. Temperature: -40°F to 225°F Pressure: 0 to 5000 psi
Available:
In Stock
Your Price:
31.53
Each
These urethane buffer rings are rectangular shaped in profile. They are most commonly used in combination with a u-cup as a rod seal. Their purpose is to protect the rod seal from contaminants as well as to apply a hydraulic “load” to the u-cup. Some of these urethane rings are used as a backup ring combined with a rubber sealing ring in suspension cylinder applications. Part numbers starting witha G are used in Case® equipment; the others are typically used in Caterpillar® equipment. Temperature: -40°F to 225°F Pressure: 0 to 5000 psi
Available:
In Stock
Your Price:
23.63
Each
These urethane buffer rings are rectangular shaped in profile. They are most commonly used in combination with a u-cup as a rod seal. Their purpose is to protect the rod seal from contaminants as well as to apply a hydraulic “load” to the u-cup. Some of these urethane rings are used as a backup ring combined with a rubber sealing ring in suspension cylinder applications. Part numbers starting witha G are used in Case® equipment; the others are typically used in Caterpillar® equipment. Temperature: -40°F to 225°F Pressure: 0 to 5000 psi
Available:
In Stock
Your Price:
25.56
Each
CAT® - Type 2 pc Stepped TFE Buffer Rings
Available:
In Stock
Your Price:
20.99
Each
CAT® - Type 2 pc Stepped TFE Buffer Rings
Available:
In Stock
Your Price:
26.53
Each
|◀ 1 - 36 of 614 ▶|
View: