|◀ 1 - 36 of 171 ▶|
View:
The E4 pneumatic piston seal is a single acting pneumatic piston seal which delivers good sealing performance with very little friction. Temp : -22 to 220 in NBR / -22 to 175 in PU Pressure : 0 to 175 PSI in NBR / 0 to 230 psI in PU
Available:
In Stock
Your Price:
6.14
Each
The E4 pneumatic piston seal is a single acting pneumatic piston seal which delivers good sealing performance with very little friction. Temp : -22 to 220 in NBR / -22 to 175 in PU Pressure : 0 to 175 PSI in NBR / 0 to 230 psI in PU
Available:
In Stock
Your Price:
4.86
Each
The E4 pneumatic piston seal is a single acting pneumatic piston seal which delivers good sealing performance with very little friction. Temp : -22 to 220 in NBR / -22 to 175 in PU Pressure : 0 to 175 PSI in NBR / 0 to 230 psI in PU
Available:
In Stock
Your Price:
113.76
Each
The E4 pneumatic piston seal is a single acting pneumatic piston seal which delivers good sealing performance with very little friction. Temp : -22 to 220 in NBR / -22 to 175 in PU Pressure : 0 to 175 PSI in NBR / 0 to 230 psI in PU
Available:
In Stock
Your Price:
4.73
Each
The E4 pneumatic piston seal is a single acting pneumatic piston seal which delivers good sealing performance with very little friction. Temp : -22 to 220 in NBR / -22 to 175 in PU Pressure : 0 to 175 PSI in NBR / 0 to 230 psI in PU
Available:
In Stock
Your Price:
7.26
Each
The E4 pneumatic piston seal is a single acting pneumatic piston seal which delivers good sealing performance with very little friction. Temp : -22 to 220 in NBR / -22 to 175 in PU Pressure : 0 to 175 PSI in NBR / 0 to 230 psI in PU
Available:
In Stock
Your Price:
11.13
Each
Profile E8 Rod Seal / Wiper Set is suitable for pneumatic cylinders with a circlip recess according to DIN7993 (Type B). The sealing part is mounted and retained by the wiper part locating it in the groove. No retaining ring is needed with this set. The sealing part is made from low friction, 80 durometer Shore A Nitrile. The fixing / scraping part is made from a highly wear resistant plastic material. Temperature : -30° to 176°F Pressure: Pneumatic
Available:
In Stock
Your Price:
13.31
Each
Profile E8 Rod Seal / Wiper Set is suitable for pneumatic cylinders with a circlip recess according to DIN7993 (Type B). The sealing part is mounted and retained by the wiper part locating it in the groove. No retaining ring is needed with this set. The sealing part is made from low friction, 80 durometer Shore A Nitrile. The fixing / scraping part is made from a highly wear resistant plastic material. Temperature : -30° to 176°F Pressure: Pneumatic
Available:
In Stock
Your Price:
38.96
Each
Profile E8 Rod Seal / Wiper Set is suitable for pneumatic cylinders with a circlip recess according to DIN7993 (Type B). The sealing part is mounted and retained by the wiper part locating it in the groove. No retaining ring is needed with this set. The sealing part is made from low friction, 80 durometer Shore A Nitrile. The fixing / scraping part is made from a highly wear resistant plastic material. Temperature : -30° to 176°F Pressure: Pneumatic
Available:
In Stock
Your Price:
13.64
Each
Profile E8 Rod Seal / Wiper Set is suitable for pneumatic cylinders with a circlip recess according to DIN7993 (Type B). The sealing part is mounted and retained by the wiper part locating it in the groove. No retaining ring is needed with this set. The sealing part is made from low friction, 80 durometer Shore A Nitrile. The fixing / scraping part is made from a highly wear resistant plastic material. Temperature : -30° to 176°F Pressure: Pneumatic
Available:
In Stock
Your Price:
16.63
Each
Profile E8 Rod Seal / Wiper Set is suitable for pneumatic cylinders with a circlip recess according to DIN7993 (Type B). The sealing part is mounted and retained by the wiper part locating it in the groove. No retaining ring is needed with this set. The sealing part is made from low friction, 80 durometer Shore A Nitrile. The fixing / scraping part is made from a highly wear resistant plastic material. Temperature : -30° to 176°F Pressure: Pneumatic
Available:
In Stock
Your Price:
17.05
Each
Profile E8 Rod Seal / Wiper Set is suitable for pneumatic cylinders with a circlip recess according to DIN7993 (Type B). The sealing part is mounted and retained by the wiper part locating it in the groove. No retaining ring is needed with this set. The sealing part is made from low friction, 80 durometer Shore A Nitrile. The fixing / scraping part is made from a highly wear resistant plastic material. Temperature : -30° to 176°F Pressure: Pneumatic
Available:
In Stock
Your Price:
18.93
Each
Profile E8 Rod Seal / Wiper Set is suitable for pneumatic cylinders with a circlip recess according to DIN7993 (Type B). The sealing part is mounted and retained by the wiper part locating it in the groove. No retaining ring is needed with this set. The sealing part is made from low friction, 80 durometer Shore A Nitrile. The fixing / scraping part is made from a highly wear resistant plastic material. Temperature : -30° to 176°F Pressure: Pneumatic
Available:
In Stock
Your Price:
19.60
Each
Item#:
E8-32X42X11

PNEUMATIC ROD SEAL/WIPER

COMBINATION
Profile E8 Rod Seal / Wiper Set is suitable for pneumatic cylinders with a circlip recess according to DIN7993 (Type B). The sealing part is mounted and retained by the wiper part locating it in the groove. No retaining ring is needed with this set. The sealing part is made from low friction, 80 durometer Shore A Nitrile. The fixing / scraping part is made from a highly wear resistant plastic material.Temperature : -30ø to 176øF Pressure: Pneumatic
Available:
In Stock
Your Price:
20.00
Each
Profile E8 Rod Seal / Wiper Set is suitable for pneumatic cylinders with a circlip recess according to DIN7993 (Type B). The sealing part is mounted and retained by the wiper part locating it in the groove. No retaining ring is needed with this set. The sealing part is made from low friction, 80 durometer Shore A Nitrile. The fixing / scraping part is made from a highly wear resistant plastic material. Temperature : -30° to 176°F Pressure: Pneumatic
Available:
Out Of Stock
Item is no longer available.
Item#:
E8-32X42X12

PNEUMATIC ROD SEAL/WIPER

COMBINATION
Profile E8 Rod Seal / Wiper Set is suitable for pneumatic cylinders with a circlip recess according to DIN7993 (Type B). The sealing part is mounted and retained by the wiper part locating it in the groove. No retaining ring is needed with this set. The sealing part is made from low friction, 80 durometer Shore A Nitrile. The fixing / scraping part is made from a highly wear resistant plastic material. Temperature : -30° to 176°F Pressure: Pneumatic
Available:
Out Of Stock
Item is no longer available.
Profile E8 Rod Seal / Wiper Set is suitable for pneumatic cylinders with a circlip recess according to DIN7993 (Type B). The sealing part is mounted and retained by the wiper part locating it in the groove. No retaining ring is needed with this set. The sealing part is made from low friction, 80 durometer Shore A Nitrile. The fixing / scraping part is made from a highly wear resistant plastic material. Temperature : -30° to 176°F Pressure: Pneumatic
Available:
In Stock
Your Price:
20.13
Each
Item#:
E8-40X50X12

PNEUMATIC ROD SEAL/WIPER

COMBINATION
Profile E8 Rod Seal / Wiper Set is suitable for pneumatic cylinders with a circlip recess according to DIN7993 (Type B). The sealing part is mounted and retained by the wiper part locating it in the groove. No retaining ring is needed with this set. The sealing part is made from low friction, 80 durometer Shore A Nitrile. The fixing / scraping part is made from a highly wear resistant plastic material. Temperature : -30° to 176°F Pressure: Pneumatic
Available:
In Stock
Your Price:
20.27
Each
Item#:
E8-63X75X13

PNEUMATIC ROD SEAL/WIPER

COMBINATION
Profile E8 Rod Seal / Wiper Set is suitable for pneumatic cylinders with a circlip recess according to DIN7993 (Type B). The sealing part is mounted and retained by the wiper part locating it in the groove. No retaining ring is needed with this set. The sealing part is made from low friction, 80 durometer Shore A Nitrile. The fixing / scraping part is made from a highly wear resistant plastic material. Temperature : -30° to 176°F Pressure: Pneumatic
Available:
In Stock
Your Price:
23.16
Each
This single acting combination rod wiper seal is made of metal vulcanized with 70 durometer elastometric nitrile rubber making it good at adjusting to temperature changes and harsh conditions. The E9 seal comes in a wide range of dimensions and has superior wiping and sealing capabilities.These E9 seals are typically held in place with a round section retaining ring. Temperature: -20°F to +220°F Pressure: PSI < 224
Available:
In Stock
Your Price:
4.08
Each
This single acting combination rod wiper seal is made of metal vulcanized with 70 durometer elastometric nitrile rubber making it good at adjusting to temperature changes and harsh conditions. The E9 seal comes in a wide range of dimensions and has superior wiping and sealing capabilities.These E9 seals are typically held in place with a round section retaining ring. Temperature: -20°F to +220°F Pressure: PSI < 224
Available:
In Stock
Your Price:
4.27
Each
This single acting combination rod wiper seal is made of metal vulcanized with 70 durometer elastometric nitrile rubber making it good at adjusting to temperature changes and harsh conditions. The E9 seal comes in a wide range of dimensions and has superior wiping and sealing capabilities.These E9 seals are typically held in place with a round section retaining ring. Temperature: -20°F to +220°F Pressure: PSI < 224
Available:
In Stock
Your Price:
4.36
Each
This single acting combination rod wiper seal is made of metal vulcanized with 70 durometer elastometric nitrile rubber making it good at adjusting to temperature changes and harsh conditions. The E9 seal comes in a wide range of dimensions and has superior wiping and sealing capabilities.These E9 seals are typically held in place with a round section retaining ring. Temperature: -20°F to +220°F Pressure: PSI < 224
Available:
In Stock
Your Price:
4.50
Each
This single acting combination rod wiper seal is made of metal vulcanized with 70 durometer elastometric nitrile rubber making it good at adjusting to temperature changes and harsh conditions. The E9 seal comes in a wide range of dimensions and has superior wiping and sealing capabilities.These E9 seals are typically held in place with a round section retaining ring. Temperature: -20°F to +220°F Pressure: PSI < 224
Available:
In Stock
Your Price:
4.76
Each
This single acting combination rod wiper seal is made of metal vulcanized with 70 durometer elastometric nitrile rubber making it good at adjusting to temperature changes and harsh conditions. The E9 seal comes in a wide range of dimensions and has superior wiping and sealing capabilities.These E9 seals are typically held in place with a round section retaining ring. Temperature: -20°F to +220°F Pressure: PSI < 224
Available:
Out Of Stock
Item is no longer available.
Item#:
E9-18X26X7X9

NITRILE WIPER ROD SEAL COMBO

This single acting combination rod wiper seal is made of metal vulcanized with 70 durometer elastometric nitrile rubber making it good at adjusting to temperature changes and harsh conditions. The E9 seal comes in a wide range of dimensions and has superior wiping and sealing capabilities.These E9 seals are typically held in place with a round section retaining ring. Temperature: -20°F to +220°F Pressure: PSI < 224
Available:
In Stock
Your Price:
4.94
Each
This single acting combination rod wiper seal is made of metal vulcanized with 70 durometer elastometric nitrile rubber making it good at adjusting to temperature changes and harsh conditions. The E9 seal comes in a wide range of dimensions and has superior wiping and sealing capabilities.These E9 seals are typically held in place with a round section retaining ring. Temperature: -20°F to +220°F Pressure: PSI < 224
Available:
In Stock
Your Price:
5.29
Each
This single acting combination rod wiper seal is made of metal vulcanized with 70 durometer elastometric nitrile rubber making it good at adjusting to temperature changes and harsh conditions. The E9 seal comes in a wide range of dimensions and has superior wiping and sealing capabilities.These E9 seals are typically held in place with a round section retaining ring. Temperature: -20°F to +220°F Pressure: PSI < 224
Available:
In Stock
Your Price:
5.98
Each
This single acting combination rod wiper seal is made of metal vulcanized with 70 durometer elastometric nitrile rubber making it good at adjusting to temperature changes and harsh conditions. The E9 seal comes in a wide range of dimensions and has superior wiping and sealing capabilities.These E9 seals are typically held in place with a round section retaining ring. Temperature: -20°F to +220°F Pressure: PSI < 224
Available:
In Stock
Your Price:
6.51
Each
This single acting combination rod wiper seal is made of metal vulcanized with 70 durometer elastometric nitrile rubber making it good at adjusting to temperature changes and harsh conditions. The E9 seal comes in a wide range of dimensions and has superior wiping and sealing capabilities.These E9 seals are typically held in place with a round section retaining ring. Temperature: -20°F to +220°F Pressure: PSI < 224
Available:
In Stock
Your Price:
7.08
Each
This single acting combination rod wiper seal is made of metal vulcanized with 70 durometer elastometric nitrile rubber making it good at adjusting to temperature changes and harsh conditions. The E9 seal comes in a wide range of dimensions and has superior wiping and sealing capabilities.These E9 seals are typically held in place with a round section retaining ring. Temperature: -20°F to +220°F Pressure: PSI < 224
Available:
In Stock
Your Price:
6.77
Each
This single acting combination rod wiper seal is made of metal vulcanized with 70 durometer elastometric nitrile rubber making it good at adjusting to temperature changes and harsh conditions. The E9 seal comes in a wide range of dimensions and has superior wiping and sealing capabilities.These E9 seals are typically held in place with a round section retaining ring. Temperature: -20°F to +220°F Pressure: PSI < 224
Available:
In Stock
Your Price:
7.52
Each
This single acting combination rod wiper seal is made of metal vulcanized with 70 durometer elastometric nitrile rubber making it good at adjusting to temperature changes and harsh conditions. The E9 seal comes in a wide range of dimensions and has superior wiping and sealing capabilities.These E9 seals are typically held in place with a round section retaining ring. Temperature: -20°F to +220°F Pressure: PSI < 224
Available:
In Stock
Your Price:
8.42
Each
This single acting combination rod wiper seal is made of metal vulcanized with 70 durometer elastometric nitrile rubber making it good at adjusting to temperature changes and harsh conditions. The E9 seal comes in a wide range of dimensions and has superior wiping and sealing capabilities.These E9 seals are typically held in place with a round section retaining ring. Temperature: -20°F to +220°F Pressure: PSI < 224
Available:
In Stock
Your Price:
9.83
Each
This single acting combination rod wiper seal is made of metal vulcanized with 70 durometer elastometric nitrile rubber making it good at adjusting to temperature changes and harsh conditions. The E9 seal comes in a wide range of dimensions and has superior wiping and sealing capabilities.These E9 seals are typically held in place with a round section retaining ring. Temperature: -20°F to +220°F Pressure: PSI < 224
Available:
In Stock
Your Price:
11.05
Each
Profile EL rod seal/wiper is used in valve shafts and small pneumatic cylinders used for printing presses and robotics. The compact design allows for a single groove for wiping and sealing. EL seals provide smooth running due to the optimal sealing lips. They can be used in dry air after initial lubrication during assembly. NBR: Temperature: +15°F to +175°F Pressure: PSI 230 PU: Temperature: -30°F to +175°F Pressure: PSI < 230
Available:
In Stock
Your Price:
4.50
Each
|◀ 1 - 36 of 171 ▶|
View:

Allegheny York Hydraulic Seals