View:
CT Series (Thin Wall) type piston cups are molded of urethane and are recommended for pneumatic applications. Thethinner lip relative to base thickness results in lower friction and longer wear. Cups are supplied solid. Center holes and bolt holes are available at an additional charge.Temperature: -65° to 200°F Pressure: 0 to 1,500 PSI
Available:
In Stock
Your Price:
6.57
Each
CT Series (Thin Wall) type piston cups are molded of urethane and are recommended for pneumatic applications. Thethinner lip relative to base thickness results in lower friction and longer wear. Cups are supplied solid. Center holes and bolt holes are available at an additional charge.Temperature: -65° to 200°F Pressure: 0 to 1,500 PSI
Available:
In Stock
Your Price:
6.37
Each
CT Series (Thin Wall) type piston cups are molded of urethane and are recommended for pneumatic applications. Thethinner lip relative to base thickness results in lower friction and longer wear. Cups are supplied solid. Center holes and bolt holes are available at an additional charge.Temperature: -65° to 200°F Pressure: 0 to 1,500 PSI
Available:
In Stock
Your Price:
6.57
Each
CT Series (Thin Wall) type piston cups are molded of urethane and are recommended for pneumatic applications. Thethinner lip relative to base thickness results in lower friction and longer wear. Cups are supplied solid. Center holes and bolt holes are available at an additional charge.Temperature: -65° to 200°F Pressure: 0 to 1,500 PSI
Available:
In Stock
Your Price:
6.67
Each
CT Series (Thin Wall) type piston cups are molded of urethane and are recommended for pneumatic applications. Thethinner lip relative to base thickness results in lower friction and longer wear. Cups are supplied solid. Center holes and bolt holes are available at an additional charge.Temperature: -65° to 200°F Pressure: 0 to 1,500 PSI
Available:
In Stock
Your Price:
6.84
Each
CT Series (Thin Wall) type piston cups are molded of urethane and are recommended for pneumatic applications. Thethinner lip relative to base thickness results in lower friction and longer wear. Cups are supplied solid. Center holes and bolt holes are available at an additional charge.Temperature: -65° to 200°F Pressure: 0 to 1,500 PSI
Available:
In Stock
Your Price:
6.92
Each
CT Series (Thin Wall) type piston cups are molded of urethane and are recommended for pneumatic applications. Thethinner lip relative to base thickness results in lower friction and longer wear. Cups are supplied solid. Center holes and bolt holes are available at an additional charge.Temperature: -65° to 200°F Pressure: 0 to 1,500 PSI
Available:
In Stock
Your Price:
149.25
Each
CT Series (Thin Wall) type piston cups are molded of urethane and are recommended for pneumatic applications. Thethinner lip relative to base thickness results in lower friction and longer wear. Cups are supplied solid. Center holes and bolt holes are available at an additional charge.Temperature: -65° to 200°F Pressure: 0 to 1,500 PSI
Available:
In Stock
Your Price:
7.96
Each
Item#:
CT12500-1250

12.125 x 12.5 x 1.25 Parker® Thin Wall Pu Piston Cup - Inch

12.5" Bore Piston Cup
CT Series (Thin Wall) type piston cups are molded of urethane and are recommended for pneumatic applications. Thethinner lip relative to base thickness results in lower friction and longer wear. Cups are supplied solid. Center holes and bolt holes are available at an additional charge.Temperature: -65° to 200°F Pressure: 0 to 1,500 PSI
Available:
In Stock
Your Price:
203.56
Each
CT Series (Thin Wall) type piston cups are molded of urethane and are recommended for pneumatic applications. Thethinner lip relative to base thickness results in lower friction and longer wear. Cups are supplied solid. Center holes and bolt holes are available at an additional charge.Temperature: -65° to 200°F Pressure: 0 to 1,500 PSI
Available:
In Stock
Your Price:
8.62
Each
Item#:
CT13000-1250

12.625 x 13 x 1.25 Parker® Thin Wall Pu Piston Cup - Inch

13" Bore Piston Cup
CT Series (Thin Wall) type piston cups are molded of urethane and are recommended for pneumatic applications. Thethinner lip relative to base thickness results in lower friction and longer wear. Cups are supplied solid. Center holes and bolt holes are available at an additional charge.Temperature: -65° to 200°F Pressure: 0 to 1,500 PSI
Available:
In Stock
Your Price:
210.23
Each
CT Series (Thin Wall) type piston cups are molded of urethane and are recommended for pneumatic applications. Thethinner lip relative to base thickness results in lower friction and longer wear. Cups are supplied solid. Center holes and bolt holes are available at an additional charge.Temperature: -65° to 200°F Pressure: 0 to 1,500 PSI
Available:
In Stock
Your Price:
9.14
Each
CT Series (Thin Wall) type piston cups are molded of urethane and are recommended for pneumatic applications. Thethinner lip relative to base thickness results in lower friction and longer wear. Cups are supplied solid. Center holes and bolt holes are available at an additional charge.Temperature: -65° to 200°F Pressure: 0 to 1,500 PSI
Available:
In Stock
Your Price:
10.26
Each
CT Series (Thin Wall) type piston cups are molded of urethane and are recommended for pneumatic applications. Thethinner lip relative to base thickness results in lower friction and longer wear. Cups are supplied solid. Center holes and bolt holes are available at an additional charge.Temperature: -65° to 200°F Pressure: 0 to 1,500 PSI
Available:
In Stock
Your Price:
11.16
Each
CT Series (Thin Wall) type piston cups are molded of urethane and are recommended for pneumatic applications. Thethinner lip relative to base thickness results in lower friction and longer wear. Cups are supplied solid. Center holes and bolt holes are available at an additional charge.Temperature: -65° to 200°F Pressure: 0 to 1,500 PSI
Available:
Out Of Stock
Your Price:
11.98
Each
CT Series (Thin Wall) type piston cups are molded of urethane and are recommended for pneumatic applications. Thethinner lip relative to base thickness results in lower friction and longer wear. Cups are supplied solid. Center holes and bolt holes are available at an additional charge.Temperature: -65° to 200°F Pressure: 0 to 1,500 PSI
Available:
In Stock
Your Price:
12.88
Each
CT Series (Thin Wall) type piston cups are molded of urethane and are recommended for pneumatic applications. Thethinner lip relative to base thickness results in lower friction and longer wear. Cups are supplied solid. Center holes and bolt holes are available at an additional charge.Temperature: -65° to 200°F Pressure: 0 to 1,500 PSI
Available:
In Stock
Your Price:
13.38
Each
CT Series (Thin Wall) type piston cups are molded of urethane and are recommended for pneumatic applications. Thethinner lip relative to base thickness results in lower friction and longer wear. Cups are supplied solid. Center holes and bolt holes are available at an additional charge.Temperature: -65° to 200°F Pressure: 0 to 1,500 PSI
Available:
In Stock
Your Price:
13.76
Each
CT Series (Thin Wall) type piston cups are molded of urethane and are recommended for pneumatic applications. Thethinner lip relative to base thickness results in lower friction and longer wear. Cups are supplied solid. Center holes and bolt holes are available at an additional charge.Temperature: -65° to 200°F Pressure: 0 to 1,500 PSI
Available:
In Stock
Your Price:
13.76
Each
CT Series (Thin Wall) type piston cups are molded of urethane and are recommended for pneumatic applications. Thethinner lip relative to base thickness results in lower friction and longer wear. Cups are supplied solid. Center holes and bolt holes are available at an additional charge.Temperature: -65° to 200°F Pressure: 0 to 1,500 PSI
Available:
In Stock
Your Price:
13.76
Each
CT Series (Thin Wall) type piston cups are molded of urethane and are recommended for pneumatic applications. Thethinner lip relative to base thickness results in lower friction and longer wear. Cups are supplied solid. Center holes and bolt holes are available at an additional charge.Temperature: -65° to 200°F Pressure: 0 to 1,500 PSI
Available:
In Stock
Your Price:
14.55
Each
CT Series (Thin Wall) type piston cups are molded of urethane and are recommended for pneumatic applications. Thethinner lip relative to base thickness results in lower friction and longer wear. Cups are supplied solid. Center holes and bolt holes are available at an additional charge.Temperature: -65° to 200°F Pressure: 0 to 1,500 PSI
Available:
In Stock
Your Price:
15.43
Each
CT Series (Thin Wall) type piston cups are molded of urethane and are recommended for pneumatic applications. Thethinner lip relative to base thickness results in lower friction and longer wear. Cups are supplied solid. Center holes and bolt holes are available at an additional charge.Temperature: -65° to 200°F Pressure: 0 to 1,500 PSI
Available:
In Stock
Your Price:
16.36
Each
CT Series (Thin Wall) type piston cups are molded of urethane and are recommended for pneumatic applications. Thethinner lip relative to base thickness results in lower friction and longer wear. Cups are supplied solid. Center holes and bolt holes are available at an additional charge.Temperature: -65° to 200°F Pressure: 0 to 1,500 PSI
Available:
In Stock
Your Price:
17.12
Each
CT Series (Thin Wall) type piston cups are molded of urethane and are recommended for pneumatic applications. Thethinner lip relative to base thickness results in lower friction and longer wear. Cups are supplied solid. Center holes and bolt holes are available at an additional charge.Temperature: -65° to 200°F Pressure: 0 to 1,500 PSI
Available:
In Stock
Your Price:
17.67
Each
CT Series (Thin Wall) type piston cups are molded of urethane and are recommended for pneumatic applications. Thethinner lip relative to base thickness results in lower friction and longer wear. Cups are supplied solid. Center holes and bolt holes are available at an additional charge.Temperature: -65° to 200°F Pressure: 0 to 1,500 PSI
Available:
In Stock
Your Price:
20.11
Each
CT Series (Thin Wall) type piston cups are molded of urethane and are recommended for pneumatic applications. Thethinner lip relative to base thickness results in lower friction and longer wear. Cups are supplied solid. Center holes and bolt holes are available at an additional charge.Temperature: -65° to 200°F Pressure: 0 to 1,500 PSI
Available:
In Stock
Your Price:
21.58
Each
CT Series (Thin Wall) type piston cups are molded of urethane and are recommended for pneumatic applications. Thethinner lip relative to base thickness results in lower friction and longer wear. Cups are supplied solid. Center holes and bolt holes are available at an additional charge.Temperature: -65° to 200°F Pressure: 0 to 1,500 PSI
Available:
In Stock
Your Price:
22.16
Each
CT Series (Thin Wall) type piston cups are molded of urethane and are recommended for pneumatic applications. Thethinner lip relative to base thickness results in lower friction and longer wear. Cups are supplied solid. Center holes and bolt holes are available at an additional charge.Temperature: -65° to 200°F Pressure: 0 to 1,500 PSI
Available:
In Stock
Your Price:
23.77
Each
CT Series (Thin Wall) type piston cups are molded of urethane and are recommended for pneumatic applications. Thethinner lip relative to base thickness results in lower friction and longer wear. Cups are supplied solid. Center holes and bolt holes are available at an additional charge.Temperature: -65° to 200°F Pressure: 0 to 1,500 PSI
Available:
In Stock
Your Price:
28.15
Each
CT Series (Thin Wall) type piston cups are molded of urethane and are recommended for pneumatic applications. Thethinner lip relative to base thickness results in lower friction and longer wear. Cups are supplied solid. Center holes and bolt holes are available at an additional charge.Temperature: -65° to 200°F Pressure: 0 to 1,500 PSI
Available:
Out Of Stock
ETA:
03/30/2018
Your Price:
28.15
Each
CT Series (Thin Wall) type piston cups are molded of urethane and are recommended for pneumatic applications. Thethinner lip relative to base thickness results in lower friction and longer wear. Cups are supplied solid. Center holes and bolt holes are available at an additional charge.Temperature: -65° to 200°F Pressure: 0 to 1,500 PSI
Available:
In Stock
Your Price:
28.97
Each
CT Series (Thin Wall) type piston cups are molded of urethane and are recommended for pneumatic applications. Thethinner lip relative to base thickness results in lower friction and longer wear. Cups are supplied solid. Center holes and bolt holes are available at an additional charge.Temperature: -65° to 200°F Pressure: 0 to 1,500 PSI
Available:
In Stock
Your Price:
30.64
Each
CT Series (Thin Wall) type piston cups are molded of urethane and are recommended for pneumatic applications. Thethinner lip relative to base thickness results in lower friction and longer wear. Cups are supplied solid. Center holes and bolt holes are available at an additional charge.Temperature: -65° to 200°F Pressure: 0 to 1,500 PSI
Available:
In Stock
Your Price:
32.28
Each
CT Series (Thin Wall) type piston cups are molded of urethane and are recommended for pneumatic applications. Thethinner lip relative to base thickness results in lower friction and longer wear. Cups are supplied solid. Center holes and bolt holes are available at an additional charge.Temperature: -65° to 200°F Pressure: 0 to 1,500 PSI
Available:
In Stock
Your Price:
37.59
Each
CT Series (Thin Wall) type piston cups are molded of urethane and are recommended for pneumatic applications. Thethinner lip relative to base thickness results in lower friction and longer wear. Cups are supplied solid. Center holes and bolt holes are available at an additional charge.Temperature: -65° to 200°F Pressure: 0 to 1,500 PSI
Available:
In Stock
Your Price:
37.59
Each
View: