View:
Item#:
PSP-210A

1 x 0.75 x 0.187 2 Pc Polyurethane/NBR Piston Seal Assembly - Inch

1" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
6.51
Each
Item#:
PSP-214A

1.25 x 1 x 0.187 2 Pc Polyurethane/NBR Piston Seal Assembly - Inch

1.25" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
6.94
Each
Item#:
PSP-218A

1.5 x 1.25 x 0.187 2 Pc Polyurethane/NBR Piston Seal Assembly - Inch

1.5" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
7.81
Each
Item#:
PSP-218AT 4300

1.5 x 1.25 x 0.275 2 Pc Wd 4300/NBR Piston Seal Assembly - Inch

1.5" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
12.53
Each
Item#:
PSP-222A

1.75 x 1.5 x 0.187 2 Pc Polyurethane/NBR Piston Seal Assembly - Inch

1.75" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
8.89
Each
Item#:
PSP-326A

2 x 1.625 x 0.281 2 Pc Polyurethane/NBR Piston Seal Assembly - Inch

2" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
9.91
Each
Item#:
PSP-326A 4300

2 x 1.625 x 0.281 2 Pc 4300/NBR Piston Seal Assembly - Inch

2" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
11.99
Each
Item#:
PSP-326AT 4300

2 x 1.625 x 0.41 2 Pc Wd 4300/NBR Piston Seal Assembly - Inch

2" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
17.91
Each
Item#:
PSP-328A

2.25 x 1.875 x 0.281 2 Pc Polyurethane/NBR Piston Seal Assembly - Inch

2.25" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
11.64
Each
Item#:
PSP-328A 4300

2-1/4x1.875x.281 NEWSTYLE 4300

2PC BI-DIRECTION PISTON SEAL
Available:
In Stock
Your Price:
0.00
Each
Contact us to order
Item#:
PSP-330A

2.5 x 2.125 x 0.281 2 Pc Polyurethane/NBR Piston Seal Assembly - Inch

2.5" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
13.02
Each
Item#:
PSP-330A 4300

2-1/2x2.125x.281 NEWSTYLE 4300

2PC BI-DIRECTION PISTON SEAL
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
18.48
Each
Item#:
PSP-330AT 4300

2.5 x 2.125 x 0.41 2 Pc Wd 4300/NBR Piston Seal Assembly - Inch

2.5" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
20.61
Each
Item#:
PSP-332A

2.75 x 2.375 x 0.281 2 Pc Polyurethane/NBR Piston Seal Assembly - Inch

2.75" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
14.45
Each
Item#:
PSP-334A

3 x 2.625 x 0.281 2 Pc Polyurethane/NBR Piston Seal Assembly - Inch

3" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
16.86
Each
Item#:
PSP-334AT

3" x 2.625 x .41 PU NEW STYLE

2PC 2 B/U WIDE PISTON SEAL
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry of the PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65ø to 220øF Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
21.45
Each
Item#:
PSP-334AT 4300

3 x 2.625 x 0.41 2 Pc Wd 4300/NBR Piston Seal Assembly - Inch

3" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
23.58
Each
Item#:
PSP-336A

3.25 x 2.875 x 0.281 2 Pc Polyurethane/NBR Piston Seal Assembly - Inch

3.25" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
19.57
Each
Item#:
PSP-336A 4300

3.25 x 2.875 x 0.281 2 Pc 4300/NBR Piston Seal Assembly - Inch

3.25" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
20.52
Each
Item#:
PSP-338A

3.5 x 3.125 x 0.281 2 Pc Polyurethane/NBR Piston Seal Assembly - Inch

3.5" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
19.55
Each
Item#:
PSP-338AT 4300

3.5 x 3.125 x 0.41 2 Pc Wd 4300/NBR Piston Seal Assembly - Inch

3.5" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
29.67
Each
Item#:
PSP-342A

4 x 3.625 x 0.281 2 Pc Polyurethane/NBR Piston Seal Assembly - Inch

4" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
23.70
Each
Item#:
PSP-342AT 4300

4 x 3.625 x 0.41 2 Pc Wd 4300/NBR Piston Seal Assembly - Inch

4" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
34.11
Each
Item#:
PSP-346A

4.5 x 4.125 x 0.281 2 Pc Polyurethane/NBR Piston Seal Assembly - Inch

4.5" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
29.55
Each
Item#:
PSP-346AT 4300

4.5 x 4.125 x 0.41 2 Pc Wd 4300/NBR Piston Seal Assembly - Inch

4.5" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
48.45
Each
Item#:
PSP-350A

5 x 4.625 x 0.281 2 Pc Polyurethane/NBR Piston Seal Assembly - Inch

5" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
35.88
Each
Item#:
PSP-425AT 4300

5 x 4.5 x 0.538 2 Pc Wd 4300/NBR Piston Seal Assembly - Inch

5" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
56.46
Each
Item#:
PSP-429A

5.5 x 5 x 0.375 2 Pc Polyurethane/NBR Piston Seal Assembly - Inch

5.5" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
46.69
Each
Item#:
PSP-433A

6 x 5.5 x 0.375 2 Pc Polyurethane/NBR Piston Seal Assembly - Inch

6" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
54.97
Each
Item#:
PSP-433AT 4300

6 x 5.5 x 0.538 2 Pc Wd 4300/NBR Piston Seal Assembly - Inch

6" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
99.77
Each
Item#:
PSP-439AT 4300

7 x 6.5 x 0.538 2 Pc Wd 4300/NBR Piston Seal Assembly - Inch

7" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
90.25
Each
Item#:
PSP-443A 4300

8 x 7.5 x 0.375 2 Pc 4300/NBR Piston Seal Assembly - Inch

8" Bore Parker® 2 Pc Piston Seal Assembly
PSP seals are bi-directional squeeze type piston seals used as direct substitutes for o-rings, T-seals and Cap seals in industrial no-back-up o-ring grooves. The unique geometry ofthe PSP seal design creates a fluid reservoir between the two level bi-lip sealing surfaces. This feature provides extra lubrication resulting in reduced breakaway and runningfriction. PSP seals are manufactured from a proprietary low friction urethane, which has excellent abrasion, tear and extrusion resistance. PSP seals provide positive, no drift sealing at a continuous service temperature range from -65 to +220 degrees F, and pressures up to 5000 psi with the recommended groove dimensions and tolerances. Temperature: -65° to 220°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
55.93
Each
View: