View:
Item#:
TP001

0.375 x 0.187 x 0.156 3 Pc NBR/Moly-Glass Piston T-Seal Assembly - Inch

0.375" Bore 3 Pc Piston Seal Assembly
Piston T-seals were originally developed to replace o-rings,and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap, and, 2. Spiral or twisting failure due to instability in their groove. T-seals’ back-ups are hydraulically or pneumaticallydriven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealingline. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Industrial piston T-seals are also available to fit one and two back-up o-ringgrooves. Please refer to Wide Base T-seals in this section. Temperature: -40° to 225°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
11.98
Each
Item#:
TP002

0.437 x 0.25 x 0.156 3 Pc NBR/Moly-Glass Piston T-Seal Assembly - Inch

0.437" Bore 3 Pc Piston Seal Assembly
Piston T-seals were originally developed to replace o-rings,and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap, and, 2. Spiral or twisting failure due to instability in their groove. T-seals’ back-ups are hydraulically or pneumaticallydriven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealingline. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Industrial piston T-seals are also available to fit one and two back-up o-ringgrooves. Please refer to Wide Base T-seals in this section. Temperature: -40° to 225°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
12.17
Each
Item#:
TP003

0.5 x 0.312 x 0.156 3 Pc NBR/Moly-Glass Piston T-Seal Assembly - Inch

0.5" Bore 3 Pc Piston Seal Assembly
Piston T-seals were originally developed to replace o-rings,and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap, and, 2. Spiral or twisting failure due to instability in their groove. T-seals’ back-ups are hydraulically or pneumaticallydriven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealingline. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Industrial piston T-seals are also available to fit one and two back-up o-ringgrooves. Please refer to Wide Base T-seals in this section. Temperature: -40° to 225°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
12.41
Each
Item#:
TP004

0.563 x 0.312 x 0.187 3 Pc NBR/Moly-Glass Piston T-Seal Assembly - Inch

0.563" Bore 3 Pc Piston Seal Assembly
Piston T-seals were originally developed to replace o-rings,and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap, and, 2. Spiral or twisting failure due to instability in their groove. T-seals’ back-ups are hydraulically or pneumaticallydriven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealingline. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Industrial piston T-seals are also available to fit one and two back-up o-ringgrooves. Please refer to Wide Base T-seals in this section. Temperature: -40° to 225°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
12.76
Each
Item#:
TP005

0.625 x 0.375 x 0.187 3 Pc NBR/Moly-Glass Piston T-Seal Assembly - Inch

0.625" Bore 3 Pc Piston Seal Assembly
Piston T-seals were originally developed to replace o-rings,and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap, and, 2. Spiral or twisting failure due to instability in their groove. T-seals’ back-ups are hydraulically or pneumaticallydriven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealingline. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Industrial piston T-seals are also available to fit one and two back-up o-ringgrooves. Please refer to Wide Base T-seals in this section. Temperature: -40° to 225°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
12.80
Each
Item#:
TP006

0.687 x 0.437 x 0.187 3 Pc NBR/Moly-Glass Piston T-Seal Assembly - Inch

0.687" Bore 3 Pc Piston Seal Assembly
Piston T-seals were originally developed to replace o-rings,and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap, and, 2. Spiral or twisting failure due to instability in their groove. T-seals’ back-ups are hydraulically or pneumaticallydriven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealingline. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Industrial piston T-seals are also available to fit one and two back-up o-ringgrooves. Please refer to Wide Base T-seals in this section. Temperature: -40° to 225°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
13.04
Each
Item#:
TP007

0.75 x 0.5 x 0.187 3 Pc NBR/Moly-Glass Piston T-Seal Assembly - Inch

0.75" Bore 3 Pc Piston Seal Assembly
Piston T-seals were originally developed to replace o-rings,and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap, and, 2. Spiral or twisting failure due to instability in their groove. T-seals’ back-ups are hydraulically or pneumaticallydriven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealingline. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Industrial piston T-seals are also available to fit one and two back-up o-ringgrooves. Please refer to Wide Base T-seals in this section. Temperature: -40° to 225°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
7.88
Each
Item#:
TP008

0.812 x 0.562 x 0.187 3 Pc NBR/Moly-Glass Piston T-Seal Assembly - Inch

0.812" Bore 3 Pc Piston Seal Assembly
Piston T-seals were originally developed to replace o-rings,and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap, and, 2. Spiral or twisting failure due to instability in their groove. T-seals’ back-ups are hydraulically or pneumaticallydriven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealingline. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Industrial piston T-seals are also available to fit one and two back-up o-ringgrooves. Please refer to Wide Base T-seals in this section. Temperature: -40° to 225°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
13.69
Each
Item#:
TP009

0.875 x 0.625 x 0.187 3 Pc NBR/Moly-Glass Piston T-Seal Assembly - Inch

0.875" Bore 3 Pc Piston Seal Assembly
Piston T-seals were originally developed to replace o-rings,and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap, and, 2. Spiral or twisting failure due to instability in their groove. T-seals’ back-ups are hydraulically or pneumaticallydriven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealingline. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Industrial piston T-seals are also available to fit one and two back-up o-ringgrooves. Please refer to Wide Base T-seals in this section. Temperature: -40° to 225°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
6.70
Each
Item#:
TP010

0.937 x 0.687 x 0.187 3 Pc NBR/Moly-Glass Piston T-Seal Assembly - Inch

0.937" Bore 3 Pc Piston Seal Assembly
Piston T-seals were originally developed to replace o-rings,and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap, and, 2. Spiral or twisting failure due to instability in their groove. T-seals’ back-ups are hydraulically or pneumaticallydriven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealingline. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Industrial piston T-seals are also available to fit one and two back-up o-ringgrooves. Please refer to Wide Base T-seals in this section. Temperature: -40° to 225°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
14.10
Each
Item#:
TP011

1 x 0.75 x 0.187 3 Pc NBR/Moly-Glass Piston T-Seal Assembly - Inch

1" Bore 3 Pc Piston Seal Assembly
Piston T-seals were originally developed to replace o-rings,and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap, and, 2. Spiral or twisting failure due to instability in their groove. T-seals’ back-ups are hydraulically or pneumaticallydriven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealingline. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Industrial piston T-seals are also available to fit one and two back-up o-ringgrooves. Please refer to Wide Base T-seals in this section. Temperature: -40° to 225°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
7.38
Each
Item#:
TP012

1.063 x 0.812 x 0.187 3 Pc NBR/Moly-Glass Piston T-Seal Assembly - Inch

1.063" Bore 3 Pc Piston Seal Assembly
Piston T-seals were originally developed to replace o-rings,and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap, and, 2. Spiral or twisting failure due to instability in their groove. T-seals’ back-ups are hydraulically or pneumaticallydriven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealingline. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Industrial piston T-seals are also available to fit one and two back-up o-ringgrooves. Please refer to Wide Base T-seals in this section. Temperature: -40° to 225°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
8.93
Each
Item#:
TP013

1.125 x 0.875 x 0.187 3 Pc NBR/Moly-Glass Piston T-Seal Assembly - Inch

1.125" Bore 3 Pc Piston Seal Assembly
Piston T-seals were originally developed to replace o-rings,and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap, and, 2. Spiral or twisting failure due to instability in their groove. T-seals’ back-ups are hydraulically or pneumaticallydriven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealingline. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Industrial piston T-seals are also available to fit one and two back-up o-ringgrooves. Please refer to Wide Base T-seals in this section. Temperature: -40° to 225°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
7.56
Each
Item#:
TP014

1.188 x 0.937 x 0.187 3 Pc NBR/Moly-Glass Piston T-Seal Assembly - Inch

1.188" Bore 3 Pc Piston Seal Assembly
Piston T-seals were originally developed to replace o-rings,and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap, and, 2. Spiral or twisting failure due to instability in their groove. T-seals’ back-ups are hydraulically or pneumaticallydriven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealingline. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Industrial piston T-seals are also available to fit one and two back-up o-ringgrooves. Please refer to Wide Base T-seals in this section. Temperature: -40° to 225°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
9.05
Each
Item#:
TP015

1.25 x 1 x 0.187 3 Pc NBR/Moly-Glass Piston T-Seal Assembly - Inch

1.25" Bore 3 Pc Piston Seal Assembly
Piston T-seals were originally developed to replace o-rings,and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap, and, 2. Spiral or twisting failure due to instability in their groove. T-seals’ back-ups are hydraulically or pneumaticallydriven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealingline. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Industrial piston T-seals are also available to fit one and two back-up o-ringgrooves. Please refer to Wide Base T-seals in this section. Temperature: -40° to 225°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
7.78
Each
Item#:
TP016

1.313 x 1.062 x 0.187 3 Pc NBR/Moly-Glass Piston T-Seal Assembly - Inch

1.313" Bore 3 Pc Piston Seal Assembly
Piston T-seals were originally developed to replace o-rings,and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap, and, 2. Spiral or twisting failure due to instability in their groove. T-seals’ back-ups are hydraulically or pneumaticallydriven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealingline. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Industrial piston T-seals are also available to fit one and two back-up o-ringgrooves. Please refer to Wide Base T-seals in this section. Temperature: -40° to 225°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
10.89
Each
Item#:
TP017

1.375 x 1.125 x 0.187 3 Pc NBR/Moly-Glass Piston T-Seal Assembly - Inch

1.375" Bore 3 Pc Piston Seal Assembly
Piston T-seals were originally developed to replace o-rings,and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap, and, 2. Spiral or twisting failure due to instability in their groove. T-seals’ back-ups are hydraulically or pneumaticallydriven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealingline. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Industrial piston T-seals are also available to fit one and two back-up o-ringgrooves. Please refer to Wide Base T-seals in this section. Temperature: -40° to 225°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
7.30
Each
Item#:
TP018

1.437 x 1.187 x 0.187 3 Pc NBR/Moly-Glass Piston T-Seal Assembly - Inch

1.437" Bore 3 Pc Piston Seal Assembly
Piston T-seals were originally developed to replace o-rings,and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap, and, 2. Spiral or twisting failure due to instability in their groove. T-seals’ back-ups are hydraulically or pneumaticallydriven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealingline. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Industrial piston T-seals are also available to fit one and two back-up o-ringgrooves. Please refer to Wide Base T-seals in this section. Temperature: -40° to 225°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
9.11
Each
Item#:
TP019

1.5 x 1.25 x 0.187 3 Pc NBR/Moly-Glass Piston T-Seal Assembly - Inch

1.5" Bore 3 Pc Piston Seal Assembly
Piston T-seals were originally developed to replace o-rings,and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap, and, 2. Spiral or twisting failure due to instability in their groove. T-seals’ back-ups are hydraulically or pneumaticallydriven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealingline. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Industrial piston T-seals are also available to fit one and two back-up o-ringgrooves. Please refer to Wide Base T-seals in this section. Temperature: -40° to 225°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
6.15
Each
Item#:
TP020

1.563 x 1.312 x 0.187 3 Pc NBR/Moly-Glass Piston T-Seal Assembly - Inch

1.563" Bore 3 Pc Piston Seal Assembly
Piston T-seals were originally developed to replace o-rings,and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap, and, 2. Spiral or twisting failure due to instability in their groove. T-seals’ back-ups are hydraulically or pneumaticallydriven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealingline. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Industrial piston T-seals are also available to fit one and two back-up o-ringgrooves. Please refer to Wide Base T-seals in this section. Temperature: -40° to 225°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
12.07
Each
Item#:
TP021

1.625 x 1.375 x 0.187 3 Pc NBR/Moly-Glass Piston T-Seal Assembly - Inch

1.625" Bore 3 Pc Piston Seal Assembly
Piston T-seals were originally developed to replace o-rings,and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap, and, 2. Spiral or twisting failure due to instability in their groove. T-seals’ back-ups are hydraulically or pneumaticallydriven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealingline. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Industrial piston T-seals are also available to fit one and two back-up o-ringgrooves. Please refer to Wide Base T-seals in this section. Temperature: -40° to 225°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
7.88
Each
Item#:
TP022

1.75 x 1.5 x 0.187 3 Pc NBR/Moly-Glass Piston T-Seal Assembly - Inch

1.75" Bore 3 Pc Piston Seal Assembly
Piston T-seals were originally developed to replace o-rings,and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap, and, 2. Spiral or twisting failure due to instability in their groove. T-seals’ back-ups are hydraulically or pneumaticallydriven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealingline. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Industrial piston T-seals are also available to fit one and two back-up o-ringgrooves. Please refer to Wide Base T-seals in this section. Temperature: -40° to 225°F Pressure: 0 to 5,000 PSI
Available:
Out Of Stock
ETA:
09/28/2018
Your Price:
6.63
Each
Item#:
TP023

1.875 x 1.5 x 0.281 3 Pc NBR/Moly-Glass Piston T-Seal Assembly - Inch

1.875" Bore 3 Pc Piston Seal Assembly
Piston T-seals were originally developed to replace o-rings,and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap, and, 2. Spiral or twisting failure due to instability in their groove. T-seals’ back-ups are hydraulically or pneumaticallydriven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealingline. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Industrial piston T-seals are also available to fit one and two back-up o-ringgrooves. Please refer to Wide Base T-seals in this section. Temperature: -40° to 225°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
8.99
Each
Item#:
TP024

2 x 1.625 x 0.281 3 Pc NBR/Moly-Glass Piston T-Seal Assembly - Inch

2" Bore 3 Pc Piston Seal Assembly
Piston T-seals were originally developed to replace o-rings,and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap, and, 2. Spiral or twisting failure due to instability in their groove. T-seals’ back-ups are hydraulically or pneumaticallydriven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealingline. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Industrial piston T-seals are also available to fit one and two back-up o-ringgrooves. Please refer to Wide Base T-seals in this section. Temperature: -40° to 225°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
6.83
Each
Item#:
TP025

2.125 x 1.75 x 0.281 3 Pc NBR/Moly-Glass Piston T-Seal Assembly - Inch

2.125" Bore 3 Pc Piston Seal Assembly
Piston T-seals were originally developed to replace o-rings,and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap, and, 2. Spiral or twisting failure due to instability in their groove. T-seals’ back-ups are hydraulically or pneumaticallydriven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealingline. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Industrial piston T-seals are also available to fit one and two back-up o-ringgrooves. Please refer to Wide Base T-seals in this section. Temperature: -40° to 225°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
7.17
Each
Item#:
TP026

2.25 x 1.875 x 0.281 3 Pc NBR/Moly-Glass Piston T-Seal Assembly - Inch

2.25" Bore 3 Pc Piston Seal Assembly
Piston T-seals were originally developed to replace o-rings,and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap, and, 2. Spiral or twisting failure due to instability in their groove. T-seals’ back-ups are hydraulically or pneumaticallydriven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealingline. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Industrial piston T-seals are also available to fit one and two back-up o-ringgrooves. Please refer to Wide Base T-seals in this section. Temperature: -40° to 225°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
7.66
Each
Item#:
TP027

2.375 x 2 x 0.281 3 Pc NBR/Moly-Glass Piston T-Seal Assembly - Inch

2.375" Bore 3 Pc Piston Seal Assembly
Piston T-seals were originally developed to replace o-rings,and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap, and, 2. Spiral or twisting failure due to instability in their groove. T-seals’ back-ups are hydraulically or pneumaticallydriven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealingline. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Industrial piston T-seals are also available to fit one and two back-up o-ringgrooves. Please refer to Wide Base T-seals in this section. Temperature: -40° to 225°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
8.08
Each
Item#:
TP028

2.5 x 2.125 x 0.281 3 Pc NBR/Moly-Glass Piston T-Seal Assembly - Inch

2.5" Bore 3 Pc Piston Seal Assembly
Piston T-seals were originally developed to replace o-rings,and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap, and, 2. Spiral or twisting failure due to instability in their groove. T-seals’ back-ups are hydraulically or pneumaticallydriven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealingline. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Industrial piston T-seals are also available to fit one and two back-up o-ringgrooves. Please refer to Wide Base T-seals in this section. Temperature: -40° to 225°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
8.57
Each
Item#:
TP029

2.625 x 2.25 x 0.281 3 Pc NBR/Moly-Glass Piston T-Seal Assembly - Inch

2.625" Bore 3 Pc Piston Seal Assembly
Piston T-seals were originally developed to replace o-rings,and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap, and, 2. Spiral or twisting failure due to instability in their groove. T-seals’ back-ups are hydraulically or pneumaticallydriven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealingline. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Industrial piston T-seals are also available to fit one and two back-up o-ringgrooves. Please refer to Wide Base T-seals in this section. Temperature: -40° to 225°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
9.23
Each
Item#:
TP030

2.75 x 2.375 x 0.281 3 Pc NBR/Moly-Glass Piston T-Seal Assembly - Inch

2.75" Bore 3 Pc Piston Seal Assembly
Piston T-seals were originally developed to replace o-rings,and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap, and, 2. Spiral or twisting failure due to instability in their groove. T-seals’ back-ups are hydraulically or pneumaticallydriven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealingline. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Industrial piston T-seals are also available to fit one and two back-up o-ringgrooves. Please refer to Wide Base T-seals in this section. Temperature: -40° to 225°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
9.37
Each
Item#:
TP031

2.875 x 2.5 x 0.281 3 Pc NBR/Moly-Glass Piston T-Seal Assembly - Inch

2.875" Bore 3 Pc Piston Seal Assembly
Piston T-seals were originally developed to replace o-rings,and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap, and, 2. Spiral or twisting failure due to instability in their groove. T-seals’ back-ups are hydraulically or pneumaticallydriven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealingline. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Industrial piston T-seals are also available to fit one and two back-up o-ringgrooves. Please refer to Wide Base T-seals in this section. Temperature: -40° to 225°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
9.61
Each
Item#:
TP032

3 x 2.625 x 0.281 3 Pc NBR/Moly-Glass Piston T-Seal Assembly - Inch

3" Bore 3 Pc Piston Seal Assembly
Piston T-seals were originally developed to replace o-rings,and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap, and, 2. Spiral or twisting failure due to instability in their groove. T-seals’ back-ups are hydraulically or pneumaticallydriven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealingline. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Industrial piston T-seals are also available to fit one and two back-up o-ringgrooves. Please refer to Wide Base T-seals in this section. Temperature: -40° to 225°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
9.80
Each
Item#:
TP033

3.125 x 2.75 x 0.281 3 Pc NBR/Moly-Glass Piston T-Seal Assembly - Inch

3.125" Bore 3 Pc Piston Seal Assembly
Piston T-seals were originally developed to replace o-rings,and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap, and, 2. Spiral or twisting failure due to instability in their groove. T-seals’ back-ups are hydraulically or pneumaticallydriven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealingline. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Industrial piston T-seals are also available to fit one and two back-up o-ringgrooves. Please refer to Wide Base T-seals in this section. Temperature: -40° to 225°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
10.70
Each
Item#:
TP034

3.25 x 2.875 x 0.281 3 Pc NBR/Moly-Glass Piston T-Seal Assembly - Inch

3.25" Bore 3 Pc Piston Seal Assembly
Piston T-seals were originally developed to replace o-rings,and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap, and, 2. Spiral or twisting failure due to instability in their groove. T-seals’ back-ups are hydraulically or pneumaticallydriven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealingline. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Industrial piston T-seals are also available to fit one and two back-up o-ringgrooves. Please refer to Wide Base T-seals in this section. Temperature: -40° to 225°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
11.74
Each
Item#:
TP035

3.5 x 3.125 x 0.281 3 Pc NBR/Moly-Glass Piston T-Seal Assembly - Inch

3.5" Bore 3 Pc Piston Seal Assembly
Piston T-seals were originally developed to replace o-rings,and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap, and, 2. Spiral or twisting failure due to instability in their groove. T-seals’ back-ups are hydraulically or pneumaticallydriven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealingline. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Industrial piston T-seals are also available to fit one and two back-up o-ringgrooves. Please refer to Wide Base T-seals in this section. Temperature: -40° to 225°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
12.85
Each
Item#:
TP036

3.625 x 3.25 x 0.281 3 Pc NBR/Moly-Glass Piston T-Seal Assembly - Inch

3.625" Bore 3 Pc Piston Seal Assembly
Piston T-seals were originally developed to replace o-rings,and retrofit into standard commercial o-ring grooves. This development ended two serious reliability problems: 1. Extrusion through the clearance gap, and, 2. Spiral or twisting failure due to instability in their groove. T-seals’ back-ups are hydraulically or pneumaticallydriven against the dynamic surface when system pressure forces the elastomer into the space beneath the back-up. This immediate response to pressure makes them very effective wipers, keeping contaminants away from the sealingline. Standard material for our T-seals is 75 durometer nitrile with moly-filled nylon back-up rings. Other materials are available upon request. Industrial piston T-seals are also available to fit one and two back-up o-ringgrooves. Please refer to Wide Base T-seals in this section. Temperature: -40° to 225°F Pressure: 0 to 5,000 PSI
Available:
In Stock
Your Price:
13.83
Each
View:

Allegheny York Hydraulic Seals